NextSDS Logo
Safety Data Sheet EN

Crotonaldehyde, predominantly trans

CAS 4170-30-3
EC 224-030-0

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Crotonaldehyde, predominantly trans
Product Code
L03362

Regulatory Identifiers

CAS Number
4170-30-3 Check regulations →
EC Number
224-030-0 Check regulations →

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 1 H330
Muta. Cat. 2 H341
STOT RE Cat. 2 H373
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapor.
H301 + H311 Toxic if swallowed or in contact with skin.
H315 Causes skin irritation.
H330 Fatal if inhaled.
H335 May cause respiratory irritation.
H341 Suspected of causing genetic defects.
H373 May cause damage to the liver through prolonged or repeated exposure. Route of exposure: Inhalation.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P309 IF exposed or if you feel unwell:
P310 Immediately call a POISON CENTER/doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
Crotonaldehyde, predominantly trans EC: 224-030-0 4170-30-3 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms: Fatal if inhaled.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes skin irritation. Toxic in contact with skin.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: This product is a lachrymator.

Ingestion

Do not induce vomiting; immediately call for medical help.

Symptoms: Toxic if swallowed.

Immediate Medical Attention

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined.

Eyes

Safety glasses.

Respiratory

Use self-contained respiratory protective device in emergency situations.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Kinematic Viscosity
Not determined.
Molecular Weight
---
Auto Ignition Temperature
230 °℃ (446 °F)
Voc Content
---
Colour Intensity
---
Metal Corrosion
---
Odor
Pungent
Melting Point
-76 °℃ (-105 °F)
State Under Standard Conditions
---
Decomposition Temperature
Not determined.
Softening Point
---
Vapor Pressure
24 hPa (18 mm Hg)
Colour
---
Crystallisation Point
---
Density
0.848 g/cm3 (7.077 lbs/gal)
Flammability
Not determined.
Flash Point
8 °C (46 °F)
Solubility In Fat
---
Evaporation Rate
Not determined.
Explosive Limits
---
Dynamic Viscosity
Not determined.
Relative Density
0.848 g/cm3 (7.077 lbs/gal)
Vapor Density
Not determined.
Bulk Density
---
Solidification Point
---
Upper Explosive Limit
15.5 Vol %
Relative Evaporation Rate
---
Freezing Point
---
Form
Liquid
Boiling Point
103-104 ℃ (217-219 ºF)
Lower Explosive Limit
2.1 Vol %
Cloud Point
---
Solubility In Water
150 g/l
Odor Threshold
Not determined.
Solubility
150 g/l
Ph
Not determined.
Physical State
Liquid
Properties Status
---
Physical State Data
liquid
Partition Coefficient
Not determined.
Appearance
Not determined.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1143
Shipping Name
CROTONALDEHYDE, STABILIZED
Transport Class
6.1 Toxic substances
Packing Group
I
ADR

Warning: Toxic substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Crotonaldehyde, predominantly trans?

The signal word is danger.

What is the physical form of Crotonaldehyde, predominantly trans?

Crotonaldehyde, predominantly trans is a liquid appearing as not determined. . It has pungent odor.

What is the solubility of Crotonaldehyde, predominantly trans?

150 g/l

What are the hazard statements for Crotonaldehyde, predominantly trans?

This substance has 7 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H301 + H311: Toxic if swallowed or in contact with skin.
  • H315: Causes skin irritation.
  • H330: Fatal if inhaled.
  • H335: May cause respiratory irritation.
  • H341: Suspected of causing genetic defects.
  • H373: May cause damage to the liver through prolonged or repeated exposure. Route of exposure: Inhalation.

What is the melting point of Crotonaldehyde, predominantly trans?

The melting point is -76 °℃ (-105 °F) and the boiling point is 103-104 ℃ (217-219 ºF).