NextSDS Logo
Ni

Nitrilotriacetic acid trisodium salt

WARNING SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Nitrilotriacetic acid trisodium salt
Product Code
N0253
Chemical Name
TRISODIUM NITILOTRIACETATE
Synonyms
N-Bis(carboxymethyl)glycine

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Identified Uses
Laboratory chemicals, Synthesis of substances

Overview

Nitrilotriacetic acid trisodium salt (CAS: 5064-31-3 ) is a form: crystalline substance commonly used laboratory chemicals, synthesis of substances.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (Warning)

Hazard Classifications

Acute Tox. Category 4 H302
Eye Irrit. Category 2A H319
Carc. Category 2 H351

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • H351: Suspected of causing cancer.

Precautionary Statements

  • P201: Obtain special instructions before use.
  • P202: Do not handle until all safety precautions have been read and understood.
  • P264: Wash skin thoroughly after handling.
  • P270: Do not eat, drink or smoke when using this product.
  • P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
  • P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P308 + P313: IF exposed or concerned: Get medical advice/ attention.
  • P337 + P313: If eye irritation persists: Get medical advice/ attention.
  • P405: Store locked up.
  • P501: Dispose of contents/ container to an approved waste disposal plant.
  • IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Sigma-Aldrich

manufacturer

📍

3050 Spruce Street SAINT LOUIS MO 63103 USA

🌍

US

📞

+1 800-325-5832

📠

+1 800-325-5052

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CHEMTREC

📞

+1-703-527-3887

🌍

US

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
TRISODIUM NITILOTRIACETATE
EC: 225-768-6
5064-31-3 90-100% ⚠️ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

🖐️ Skin Contact

Wash off with soap and plenty of water. Consult a physician.

👁️ Eye Contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

🍽️ Ingestion/Swallowing

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

📊 Bulk Density
Not available
💨 Boiling Point
No data available
Critical Property
👁️ Appearance
Form: crystalline
📊 Auto Ignition Temperature
> 200 °℃ (> 392 °F) at 1,013.25 hPa (760.00 mmHg)
📊 Relative Density
1.77 g/cm3 at 20 ℃ (68 °F)
📊 Solidification Point
Not available
📊 Lower Explosive Limit
No data available
👃 Odor
No data available
💨 Vapor Pressure
No data available
📊 Decomposition Temperature
No data available
📊 Physical State Data
Not available
⚖️ Density
Not available
📊 Partition Coefficient
No data available
📊 Molecular Weight
Not available
📊 Upper Explosive Limit
No data available
📊 Solubility In Fat
Not available
📊 Softening Point
Not available
📊 Crystallisation Point
Not available
📊 Explosive Limits
Not available
🔥 Flash Point
No data available
Critical Property
📊 Freezing Point
Not available
📊 Metal Corrosion
Not available
📊 Properties Status
Not available
📊 Odor Threshold
No data available
🔥 Flammability
No data available
🧊 Melting Point
300 ℃ (572 °F)
Critical Property
📊 Voc Content
Not available
📊 Solubility In Water
ca.640 g/l at 20 °℃ (68 ºF)
💨 Evaporation Rate
No data available
🧪 Physical State
Not available
📊 Relative Evaporation Rate
Not available
📊 Kinematic Viscosity
Not available
🧪 Ph
No data available
📊 State Under Standard Conditions
Not available
📊 Colour Intensity
Not available
📊 Form
Not available
🎨 Colour
Not available
📊 Dynamic Viscosity
Not available
📊 Vapor Density
No data available
💧 Solubility
ca.640 g/l at 20 °℃ (68 ºF)
📊 Cloud Point
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

🧤 Hand Protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Dermatril® (KCL 740 / Aldrich Z677272, Size M)

👁️ Eye Protection

Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

😷 Respiratory Protection

Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

🌍 Environmental Exposure Controls

Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What other names is Nitrilotriacetic acid trisodium salt known by?

Nitrilotriacetic acid trisodium salt is also known as: N-Bis(carboxymethyl)glycine

What is the hazard signal word for Nitrilotriacetic acid trisodium salt?

The signal word for this substance is "warning".

What is the solubility of Nitrilotriacetic acid trisodium salt?

ca.640 g/l at 20 °℃ (68 ºF)

What is Nitrilotriacetic acid trisodium salt used for?

Laboratory chemicals, Synthesis of substances

What are the hazard statements for Nitrilotriacetic acid trisodium salt?

This substance has 3 hazard statements: H302: Harmful if swallowed. H319: Causes serious eye irritation. H351: Suspected of causing cancer.

What is the melting point of Nitrilotriacetic acid trisodium salt?

The melting point is 300 ℃ (572 °F) and the boiling point is No data available.