NextSDS Logo
Safety Data Sheet EN

n-Butyl acrylate

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
n-Butyl acrylate
Product Code
11899
Synonyms
Acrylic acid n-butyl ester

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

J

Johnson Matthey Catalog Company Inc.

manufacturer

30 Bond Street, Ward Hill, Massachusetts, 01835-8099

Emergency Contacts

Johnson Matthey Catalog Company Inc.

(978) 521-6300

CHEMTREC

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

Hazard Classifications

FLAMMABLE
IRRITANT
LACHRYMATORY

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
n-Butyl acrylate 141-32-2 --- No

Notes

Minor Impurities: Not determined

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing is difficult give oxygen and seek medical attention.

Skin contact

Remove contaminated clothing. Wash affected area with soap and water. Rinse thoroughly. If irritation persists or other symptoms are observed, seek medical advice.

Eye contact

Flush with copious amounts of water for at least 15 minutes. If irritation or lachrymation persists, seek medical attention.

Ingestion

Rinse out mouth and drink lots of water. In case of irritation or other symptoms, seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use carbon dioxide or dry powder. Use fire fighting measures which suit the environment and take into account other materials which may be involved.

Unsuitable media

In general, water-based extinguishers should not be used for fires involving organic materials.

Instructions

Use fire fighting measures which suit the environment and take into account other materials which may be involved.

Firefighter Protection

Wear self-contained breathing apparatus and protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Take precautions to ensure product does not contaminate the ground or enter the drainage system.

Cleanup methods

Absorb in vermiculite or proprietary absorbent material and transfer to sealed containers for disposal.

Materials: vermiculite or proprietary absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Chemicals should be used only by those trained in handling potentially hazardous materials. Rubber gloves, eye protection and protective clothing should be worn.

Storage

Store in tightly sealed containers in a cool place. Protect from moisture. Material is sensitive to light.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle in an efficient fume hood or equivalent system.

Hands

Wear rubber gloves.

Eyes

Wear safety spectacles, goggles or, for larger quantities, a full face mask.

Respiratory

Avoid inhalation of product.

Skin/Body

Wear protective clothing and, for larger quantities, full arm, body and face protection.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Physical State Data
liquid
Voc Content
---
Ph
---
Upper Explosive Limit
---
Explosive Limits
---
Appearance
Colorless liquid
Relative Density
---
Colour
Colorless
Physical State
liquid
Colour Intensity
---
Crystallisation Point
---
Solubility In Fat
---
Molecular Weight
128.17
Melting Point
---
Lower Explosive Limit
---
Vapor Pressure
---
Kinematic Viscosity
---
Evaporation Rate
---
Density
0.894
Auto Ignition Temperature
---
Vapor Density
---
Partition Coefficient
---
Metal Corrosion
---
Softening Point
---
Decomposition Temperature
---
Solubility
---
Odor
---
Bulk Density
---
Relative Evaporation Rate
---
Boiling Point
145-146°
Solidification Point
---
Form
liquid
Solubility In Water
Insol
Freezing Point
---
Flash Point
39°
Cloud Point
---
Flammability
---
State Under Standard Conditions
---
Dynamic Viscosity
---
Odor Threshold
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Incompatible

Strong bases. Strong acids. Strong oxidising agents.

Decomposition

carbon monoxide, carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Disposal should be via an approved contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2348
Transport Class
3.3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is n-Butyl acrylate known by?

n-Butyl acrylate is also known as: Acrylic acid n-butyl ester

What is the hazard signal word for n-Butyl acrylate?

The signal word is na: r-phrases.

What is the physical form of n-Butyl acrylate?

n-Butyl acrylate is a liquid appearing as colorless liquid with colorless color.