NextSDS Logo
Safety Data Sheet EN

Cyclopentane

CAS 287-92-3
EC 206-016-6

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Cyclopentane
Product Code
44814
Chemical Name
cyclopentane 601-030-00-2

Regulatory Identifiers

CAS Number
287-92-3 Check regulations →
EC Number
206-016-6 Check regulations →

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

866-928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H225 Highly flammable liquid and vapor.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P280 Wear protective gloves / eye protection / face protection.
P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
cyclopentane 601-030-00-2 EC: 206-016-6 287-92-3 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.4 mm.

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type AXBEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility
Not specified
Ph
Not determined.
Crystallisation Point
---
Relative Evaporation Rate
---
Metal Corrosion
---
Explosive Limits
---
Partition Coefficient
Not determined.
Decomposition Temperature
Not determined
Freezing Point
---
Flammability
Not determined.
Flash Point
-37 ℃ (-35 °F)
Colour
---
Melting Point
-94 ℃ (-137 ºF)
Evaporation Rate
Not determined.
Boiling Point
47-49 ℃ (117-120 °F)
Vapor Density
Not determined.
Properties Status
---
Kinematic Viscosity
Not determined.
Physical State Data
liquid
State Under Standard Conditions
---
Lower Explosive Limit
Not determined.
Softening Point
---
Upper Explosive Limit
Not determined.
Auto Ignition Temperature
380 °℃ (716 °F)
Solidification Point
---
Voc Content
---
Odor Threshold
Not determined.
Bulk Density
---
Molecular Weight
---
Dynamic Viscosity
0.44 mPas
Vapor Pressure
530 hPa (398 mm Hg)
Form
Liquid
Relative Density
Not determined.
Solubility In Fat
---
Appearance
Not specified
Colour Intensity
---
Odor
Petrol-like
Solubility In Water
0.15 g/l
Cloud Point
---
Physical State
Liquid
Density
0.748 g/cm3 (6.242 lbs/gal)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1146
Shipping Name
Cyclopentane
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Cyclopentane?

The signal word is danger.

What is the physical form of Cyclopentane?

Cyclopentane is a liquid appearing as not specified . It has petrol-like odor.

What is the solubility of Cyclopentane?

Not specified

What are the hazard statements for Cyclopentane?

This substance has 1 hazard statement:

  • H225: Highly flammable liquid and vapor.

What is the melting point of Cyclopentane?

The melting point is -94 ℃ (-137 ºF) and the boiling point is 47-49 ℃ (117-120 °F).

Compliance Scanner

Scan your compliance