NextSDS Logo
Co

Coumaphos

DANGER solid SDS/MSDS
Chemical Identity

Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Coumaphos
Product Code
45403
Chemical Name
coumaphos (ISO) O -3-chloro-4-methylcoumarin-7-yl O , O -diethyl phosphorothioate 015-038-00-3

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Identified Uses
Laboratory chemicals, Synthesis of substances

Overview

Coumaphos (CAS: 56-72-4 ) is a no data available substance commonly used laboratory chemicals, synthesis of substances.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

Safety Classification

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Acute Tox. Category 2 H300
Acute Tox. Category 3 H311
Aquatic Acute Category 1 H400
Aquatic Chronic Category 1 H410

GHS Hazard Pictograms & Safety Symbols

GHS06 GHS Hazard Pictogram: Acute toxicity hazard - Poisonous materials that can cause death or serious harm

GHS06

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H300: Fatal if swallowed.
  • H311: Toxic in contact with skin.
  • H410: Very toxic to aquatic life with long lasting effects.

Precautionary Statements

  • P264: Wash skin thoroughly after handling.
  • P270: Do not eat, drink or smoke when using this product.
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/ protective clothing.
  • P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
  • P302+P352: IF ON SKIN: Wash with plenty of soap and water.
  • P312: Call a POISON CENTER/doctor if you feel unwell.
  • P322: Specific measures (see supplemental first aid instructions on this label).
  • P330: Rinse mouth.
  • P361: Remove/Take off immediately all contaminated clothing.
  • P363: Wash contaminated clothing before reuse.
  • P391: Collect spillage.
  • P405: Store locked up.
  • P501: Dispose of contents/ container to an approved waste disposal plant.
Supply Chain

Manufacturers & Suppliers

Authorized suppliers, manufacturers, and distribution network information

Sigma-Aldrich

manufacturer

3050 Spruce Street, SAINT LOUIS MO 63103, USA

US

+1 800-325-5832

+1 800-325-5052

Emergency

24/7 Emergency Response

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CHEMTREC

+1-703-527-3887

US

Composition

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

substance

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
coumaphos (ISO) O -3-chloro-4-methylcoumarin-7-yl O , O -diethyl phosphorothioate 015-038-00-3
EC: 200-285-3
56-72-4 100% Hazardous
First Aid

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

Inhalation Exposure

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

Skin Contact

Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.

Eye Contact

Flush eyes with water as a precaution.

Ingestion/Swallowing

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Alternatives

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Section 9

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

Properties Status
Not available
Physical State
solid
Critical Property
Odor
No data available
Upper Explosive Limit
No data available
Solubility In Fat
Not available
Crystallisation Point
Not available
Lower Explosive Limit
No data available
Cloud Point
Not available
Flash Point
100.00 °C (212.00 °F) - closed cup
Critical Property
Appearance
No data available
Vapor Density
No data available
Relative Evaporation Rate
Not available
Voc Content
Not available
Freezing Point
No data available
Explosive Limits
Not available
Ph
No data available
Form
solid
Density
Not available
Kinematic Viscosity
Not available
Flammability
No data available
Molecular Weight
Not available
Colour Intensity
Not available
Bulk Density
Not available
Evaporation Rate
No data available
Partition Coefficient
No data available
State Under Standard Conditions
Not available
Solidification Point
Not available
Dynamic Viscosity
No data available
Odor Threshold
No data available
Melting Point
No data available
Critical Property
Physical State Data
solid
Relative Density
No data available
Boiling Point
> 200 °C (> 392 °F) at 1,013 hPa (760 mmHg)
Critical Property
Solubility
insoluble
Auto Ignition Temperature
No data available
Softening Point
Not available
Decomposition Temperature
No data available
Colour
Not available
Metal Corrosion
Not available
Vapor Pressure
1.7 hPa (1.3 mmHg) at 20 ℃ (68 ºF)
Solubility In Water
insoluble
Section 8

Exposure Controls & Personal Protective Equipment

Occupational exposure limits, engineering controls, and required safety equipment

Engineering Controls

Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.

Hand Protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Full contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.

Eye Protection

Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Respiratory Protection

Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Skin/Body Protection

Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Environmental Exposure Controls

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

Section 14

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

UN Number

2811

Proper Shipping Name

Toxic solids, organic, n.o.s. (Coumaphos)

Transport Hazard Class

6.1

Packing Group

II

FAQ

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Coumaphos?

The signal word for this substance is "danger".

What is the physical form of Coumaphos?

Coumaphos is a solid appearing as no data available . It has no data available odor.

What is the solubility of Coumaphos?

insoluble

What is Coumaphos used for?

Laboratory chemicals, Synthesis of substances

What are the hazard statements for Coumaphos?

This substance has 3 hazard statements: H300: Fatal if swallowed. H311: Toxic in contact with skin. H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of Coumaphos?

The melting point is No data available and the boiling point is > 200 °C (> 392 °F) at 1,013 hPa (760 mmHg).