Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium borohydride
- Product Code
- 13432
- Chemical Name
- Sodium tetrahydroborate
Regulatory Identifiers
- CAS Number
- 16940-66-2 Check regulations →
- EC Number
- 241-004-4 Check regulations →
Identified Uses
SU24 Scientific research and development
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
800-343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
866-928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterization: Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium tetrahydroborate EC: 241-004-4 | 16940-66-2 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Symptoms: Fatal if inhaled.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Symptoms: Causes severe skin burns. Toxic in contact with skin.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms: Causes serious eye damage.
Do not induce vomiting; immediately call for medical help.
Symptoms: Toxic if swallowed.
Immediate Medical Attention
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Sodium perborate tetrahydrate
CAS: 10486-00-7
Trimethyl borate
CAS: 121-43-7
Sodium bromate
CAS: 7789-38-0
Boric anhydride
CAS: 1303-86-2
Sodium tetraborate, anhydrous
CAS: 1330-43-4
Sodium hydroxide
CAS: 1310-73-2
Sodium sulfide nonahydrate
CAS: 1313-84-4
Sodium ethoxide
CAS: 141-52-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.11 mm.
Tightly sealed goggles. Full face protection. Safety glasses with side shields / NIOSH (US) or EN 166(EU).
Use self-contained respiratory protective device in emergency situations. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1426
- Shipping Name
- Sodium borohydride
- Transport Class
- 4.3
- Packing Group
- I
Warning: Substances which, in contact with water, emit flammable gases F-G,S-Ö E H1 Keep as dry as reasonably practicable SG26 In addition: from goods of classes 2.1 and 3 when stowed on deck of a containership a minimum distance of two container spaces athwartship shall be maintained, when stowed on ro-ro ships a distance of 6 m athwartship shall be maintained. SG35 Stow "separated from" acids.
Warning: Substances which, in contact with water, emit flammable gases
Warning: Substances which, in contact with water, emit flammable gases
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium borohydride?
The signal word is danger.
What is the physical form of Sodium borohydride?
Sodium borohydride is a various forms (powder/flake/crystalline/beads, etc.) . It has weak odor.
What is the solubility of Sodium borohydride?
Contact with water releases flammable gases
What is Sodium borohydride used for?
SU24 Scientific research and development
What are the hazard statements for Sodium borohydride?
This substance has 6 hazard statements:
- H260: In contact with water releases flammable gases, which may ignite spontaneously.
- H301: Toxic if swallowed.
- H311: Toxic in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H318: Causes serious eye damage.
- H330: Fatal if inhaled.
What is the melting point of Sodium borohydride?
The melting point is 400 °C (752 ºF) (dec) and the boiling point is Not determined.