NextSDS Logo
Safety Data Sheet EN

1,2-Cyclohexanedicarboxylic anhydride, cis + trans

CAS 85-42-7
EC 201-604-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
1,2-Cyclohexanedicarboxylic anhydride, cis + trans
Product Code
L20001

Regulatory Identifiers

CAS Number
85-42-7 Check regulations →
EC Number
201-604-9 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Resp. Sens. Cat. 1 H334
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P284 In case of inadequate ventilation wear respiratory protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor/.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
1,2-Cyclohexanedicarboxylic anhydride, cis + trans EC: 201-604-9 85-42-7 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Immediate Medical Attention

Seek immediate medical advice.

Medical Treatment

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Firefighter Protection

Wear self-contained respirator. Wear fully protective impervious suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental

Do not allow product to reach sewage system or any water course.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle under dry protective gas. Keep container tightly sealed.

Storage

Store in cool, dry place in tightly closed containers. Store under dry inert gas. Store in cool, dry conditions in well sealed containers. Protect from humidity and water.

Fire prevention

No information known.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

Eyes

Tightly sealed goggles

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
Not determined
Odor
Not determined
Flash Point
275 °C (527 °F)
State Under Standard Conditions
---
Relative Density
Not determined.
Crystallisation Point
---
Upper Explosive Limit
Not determined
Partition Coefficient
Not determined.
Freezing Point
---
Flammability
Not determined.
Auto Ignition Temperature
Not determined
Colour Intensity
---
Voc Content
---
Boiling Point
157 °C (315 °F) (17mm)
Softening Point
---
Physical State Data
solid
Bulk Density
---
Physical State
Fused solid
Vapor Pressure
0.01 hPa
Molecular Weight
---
Vapor Density
Not applicable.
Metal Corrosion
---
Appearance
Fused solid
Explosive Limits
---
Decomposition Temperature
Not determined
Kinematic Viscosity
Not applicable.
Evaporation Rate
Not applicable.
Relative Evaporation Rate
---
Solubility In Water
Reacts
Density
Not determined
Form
Fused solid
Solubility In Fat
---
Colour
White
Properties Status
---
Odor Threshold
Not determined.
Solidification Point
---
Dynamic Viscosity
Not applicable.
Cloud Point
---
Ph
Not applicable.
Melting Point
32-34 °C (90-93 °F)
Solubility
Reacts
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information known.

Hazardous reactions

Reacts with strong oxidizing agents

Avoid

No further relevant information available.

Incompatible

Acids, Water/moisture, Bases, Oxidizing agents

Decomposition

Carbon monoxide and carbon dioxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Consult state, local or national regulations to ensure proper disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 1,2-Cyclohexanedicarboxylic anhydride, cis + trans?

The signal word is danger.

What is the physical form of 1,2-Cyclohexanedicarboxylic anhydride, cis + trans?

1,2-Cyclohexanedicarboxylic anhydride, cis + trans is a fused solid appearing as fused solid with white color. It has not determined odor.

What is the solubility of 1,2-Cyclohexanedicarboxylic anhydride, cis + trans?

Reacts

What is 1,2-Cyclohexanedicarboxylic anhydride, cis + trans used for?

SU24 Scientific research and development

What are the hazard statements for 1,2-Cyclohexanedicarboxylic anhydride, cis + trans?

This substance has 3 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H318: Causes serious eye damage.
  • H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

What is the melting point of 1,2-Cyclohexanedicarboxylic anhydride, cis + trans?

The melting point is 32-34 °C (90-93 °F) and the boiling point is 157 °C (315 °F) (17mm).