Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1,2,3,6-Tetrahydrophthalic anhydride
- Product Code
- 318659
Regulatory Identifiers
- CAS Number
- 85-43-8 Check regulations →
Identified Uses
For R&D use only.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2,3,6-Tetrahydrophthalic anhydride | 85-43-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim from source of exposure to fresh air. If breathing is difficult, administer oxygen. Seek medical attention.
Wash thoroughly with soap and plenty of water. Seek medical attention.
Immediately flush eyes with running water for at least 15 minutes while keeping eyes open. Seek medical attention.
Do not induce vomiting. Give water to victim to drink. Seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use carbon dioxide, dry chemical powder, alcohol-resistant or polymer foam.
emits toxic fumes under fire conditions.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel. Ventilate area.
Prevent further leakage if safe to do so.
place in closed container for disposal.
Related Products
Similar products with comparable safety profiles
Methyltetrahydrophthalic anhydride
CAS: 26590-20-5
Methylhexahydrophthalic anhydride
CAS: 25550-51-0
Phthalic anhydride
CAS: 85-44-9
Tetrachlorophthalic anhydride
CAS: 117-08-8
1,2,4-Benzenetricarboxylic anhydride
CAS: 552-30-7
1,2,4,5-Benzenetetracarboxylic dianhydride
CAS: 89-32-7
Terephthalic acid
CAS: 100-21-0
Phthalic acid, ACS
CAS: 88-99-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged use. Avoid all direct contact with material. Do not breathe dust or vapor. Wash thoroughly after handling.
Keep container tightly closed. Store in a cool, dry, well-ventilated area.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation during use.
Wear chemical-resistant gloves.
Wear protective safety goggles or face shields tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).
Approved respiratory equipment must be used when airborne concentrations are unknown or exceed the exposure limits.
Wear protective clothing and boots.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
no data available
no data available
Strong oxidizing agents, strong acids, and strong bases.
May evolve carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dissolve in or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1,2,3,6-Tetrahydrophthalic anhydride?
The signal word is warning.
What is the physical form of 1,2,3,6-Tetrahydrophthalic anhydride?
1,2,3,6-Tetrahydrophthalic anhydride is a solid appearing as white solid . It has no data available odor.
What is the solubility of 1,2,3,6-Tetrahydrophthalic anhydride?
no data available
What is 1,2,3,6-Tetrahydrophthalic anhydride used for?
For R&D use only.
What are the hazard statements for 1,2,3,6-Tetrahydrophthalic anhydride?
This substance has 4 hazard statements:
- H302: Harmful if swallowed
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of 1,2,3,6-Tetrahydrophthalic anhydride?
The melting point is 101-104°C and the boiling point is no data available.