NextSDS Logo
3,

3,5-Dimethylphenol

DANGER Crystalline SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
3,5-Dimethylphenol
Product Code
L05600
Chemical Name
3,5-xylenol 3,5-dimethylphenol 604-037-00-9

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Identified Uses
SU24 Scientific research and development

Overview

3,5-Dimethylphenol (CAS: 108-68-9 ) commonly used su24 scientific research and development.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Acute Tox. Category 3 H301
Acute Tox. Category 3 H311
Skin Corr. Category 1B H314

GHS Hazard Pictograms & Safety Symbols

GHS06 GHS Hazard Pictogram: Acute toxicity hazard - Poisonous materials that can cause death or serious harm

GHS06

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H301: Toxic if swallowed.
  • H311: Toxic in contact with skin.
  • H314: Causes severe skin burns and eye damage.

Precautionary Statements

  • P260: Do not breathe dust/fume/gas/mist/vapours/spray.
  • P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor/ ...
  • P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P361: Take off immediately all contaminated clothing.
  • P405: Store locked up.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. company logo - Safety Data Sheet supplier organization

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

📍

30 Bond Street, Ward Hill, MA 01835-8099

🌍

US

📞

800-343-0660

📠

800-322-4757

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

📞

(800) 343-0660

🕒

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

📞

(866) 928-0789

🕒

After normal business hours

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

substance

General Composition

Substances

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
3,5-xylenol 3,5-dimethylphenol 604-037-00-9
EC: 203-606-5
108-68-9 Not specified ✓ Non-hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

🖐️ Skin Contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms:

Causes severe skin burns.

👁️ Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms:

Causes serious eye damage.

🍽️ Ingestion/Swallowing

Do not induce vomiting; immediately call for medical help.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

📊 Solubility In Fat
Not available
🔥 Flammability
Not determined.
⚖️ Density
1.12 g/cm3 (9.346 lbs/gal)
Critical Property
📊 Colour Intensity
Not available
📊 Relative Evaporation Rate
Not available
📊 Upper Explosive Limit
Not determined
📊 Crystallisation Point
Not available
📊 State Under Standard Conditions
Not available
📊 Vapor Density
Not applicable.
📊 Solubility In Water
10 g/l
📊 Freezing Point
Not available
🧪 Ph
Not applicable.
📊 Kinematic Viscosity
Not applicable.
🔥 Flash Point
109 ℃ (228 °F)
Critical Property
📊 Physical State Data
solid
📊 Solidification Point
Not available
👃 Odor
Not determined
🧪 Physical State
Crystalline
Critical Property
📊 Partition Coefficient
Not determined.
📊 Explosive Limits
Not available
💧 Solubility
Not available
📊 Form
Crystalline
📊 Bulk Density
Not available
📊 Voc Content
Not available
📊 Properties Status
Not available
🧊 Melting Point
64 °℃ (147 ºF)
Critical Property
🎨 Colour
Not determined
📊 Lower Explosive Limit
Not determined
📊 Auto Ignition Temperature
Not determined
📊 Molecular Weight
Not available
💨 Evaporation Rate
Not applicable.
💨 Boiling Point
222 °C (432 ºF)
Critical Property
📊 Odor Threshold
Not determined.
📊 Dynamic Viscosity
Not applicable.
📊 Metal Corrosion
Not available
💨 Vapor Pressure
1.3 hPa (1 mm Hg)
📊 Softening Point
Not available
📊 Cloud Point
Not available
📊 Decomposition Temperature
Not determined
📊 Relative Density
Not determined.
👁️ Appearance
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

🧤 Hand Protection

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

👁️ Eye Protection

Tightly sealed goggles. Full face protection

😷 Respiratory Protection

Use suitable respirator when high concentrations are present.

🦺 Skin/Body Protection

Protective work clothing.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN2261

📦 Proper Shipping Name

XYLENOLS, SOLID

⚠️ Transport Hazard Class

6.1

📋 Packing Group

II

🚛 ADR Transport Precautions

Warning: Toxic substances

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for 3,5-Dimethylphenol?

The signal word for this substance is "danger".

What is the physical form of 3,5-Dimethylphenol?

3,5-Dimethylphenol is a crystalline with not determined color. It has not determined odor.

What is 3,5-Dimethylphenol used for?

SU24 Scientific research and development

What are the hazard statements for 3,5-Dimethylphenol?

This substance has 3 hazard statements: H301: Toxic if swallowed. H311: Toxic in contact with skin. H314: Causes severe skin burns and eye damage.

What is the melting point of 3,5-Dimethylphenol?

The melting point is 64 °℃ (147 ºF) and the boiling point is 222 °C (432 ºF).