Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium tetraborate, anhydrous
- Product Code
- 10875
Regulatory Identifiers
- CAS Number
- 1330-43-4 Check regulations →
- EC Number
- 215-540-4 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium tetraborate, anhydrous EC: 215-540-4 | 1330-43-4 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Immediate Medical Attention
Seek immediate medical advice.
Medical Treatment
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product is not flammable. Use fire-fighting measures that suit the surrounding fire.
If this product is involved in a fire, the following can be released: Sodium oxide, Boron oxide
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Sodium tetraborate decahydrate
CAS: 1303-96-4
di-Sodium tetraborate anhydrous for analysis
CAS: 1330-43-4
Sodium perborate tetrahydrate
CAS: 10486-00-7
Sodium sulphate, anhydrous
---
Sodium thiosulfate, anhydrous
CAS: 7772-98-7
Sodium Sulfate Anhydrous
CAS: 7757-82-6
Ammonium pentaborate tetrahydrate
CAS: 12046-04-7
Sodium phosphate, tribasic, anhydrous
CAS: 7601-54-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Ensure good ventilation at the workplace. Open and handle container with care.
Store in cool, dry place in tightly closed containers. Store under dry inert gas. This product is hygroscopic. Keep container tightly sealed. Store in cool, dry conditions in well sealed containers. Protect from humidity and water.
The product is not flammable
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR
Safety glasses with side shields / NIOSH (US) or EN 166(EU)
Use suitable respirator when high concentrations are present.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
No dangerous reactions known
No further relevant information available.
Reducing agents, Water/moisture
Sodium oxide, Boron oxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
For use only by technically qualified individuals.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium tetraborate, anhydrous?
The signal word is danger.
What is the physical form of Sodium tetraborate, anhydrous?
Sodium tetraborate, anhydrous is a powder . It has odorless odor.
What is Sodium tetraborate, anhydrous used for?
SU24 Scientific research and development
What are the hazard statements for Sodium tetraborate, anhydrous?
This substance has 1 hazard statement:
- H360: May damage fertility or the unborn child.
What is the melting point of Sodium tetraborate, anhydrous?
The melting point is 741 °C (1366 °F) and the boiling point is 1575 °C (2867 °F) (dec).