NextSDS Logo
Safety Data Sheet EN

Ethylenediaminetetraacetic acid, ACS

CAS 60-00-4
EC 200-449-4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ethylenediaminetetraacetic acid, ACS
Product Code
11931

Regulatory Identifiers

CAS Number
60-00-4 Check regulations →
EC Number
200-449-4 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash thoroughly after handling.
P280 Wear eye protection / face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
Ethylenediaminetetraacetic acid EC: 200-449-4 60-00-4 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye irritation.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.11 mm

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type N95 (USA) or PE (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Partition Coefficient
Not determined.
Odor Threshold
Not determined.
Vapor Density
Not applicable.
Boiling Point
Not determined
Cloud Point
---
State Under Standard Conditions
---
Relative Evaporation Rate
---
Crystallisation Point
---
Decomposition Temperature
Not determined
Bulk Density
600 kg/m3
Voc Content
---
Softening Point
---
Physical State
---
Solubility
---
Form
---
Odor
Odorless
Flash Point
---
Lower Explosive Limit
Not determined
Physical State Data
---
Appearance
Powder
Vapor Pressure
Not applicable.
Auto Ignition Temperature
>150 °C (>302 °F)
Molecular Weight
---
Flammability
Not determined.
Density
0.68 g/cm3 (5.675 lbs/gal)
Upper Explosive Limit
Not determined
Solubility In Water
0.5 g/l
Dynamic Viscosity
Not applicable.
Freezing Point
---
Ph
Not applicable.
Melting Point
ca 245 °C (ca 473 ºF) (dec)
Explosive Limits
---
Metal Corrosion
---
Kinematic Viscosity
Not applicable.
Colour Intensity
---
Evaporation Rate
Not applicable.
Solidification Point
---
Solubility In Fat
---
Relative Density
Not determined.
Colour
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ethylenediaminetetraacetic acid, ACS?

The signal word is warning.

What is Ethylenediaminetetraacetic acid, ACS used for?

SU24 Scientific research and development

What are the hazard statements for Ethylenediaminetetraacetic acid, ACS?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of Ethylenediaminetetraacetic acid, ACS?

The melting point is ca 245 °C (ca 473 ºF) (dec) and the boiling point is Not determined.