Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Chlorotrifluoromethane commonly used laboratory chemicals, manufacture of substances, scientific research and development.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS04
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H280: Contains gas under pressure; may explode if heated
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
- H336: May cause drowsiness or dizziness
- May displace oxygen and cause rapid suffocation
- H420: Harms public health and the environment by destroying ozone in the upper atmosphere
Precautionary Statements
- P261: Avoid breathing fumes, gas, mist, spray, vapors
- P264: Wash skin thoroughly after handling
- P271: Use only outdoors or in a well-ventilated area
- P280: Wear protective gloves/protective clothing/eye protection/face protection
- P302+P352: If on skin: Wash with plenty of soap and water
- P304+P340: If inhaled: Remove person to fresh air and keep comfortable for breathing
- P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- P312: Call a POISON CENTER or doctor/physician if you feel unwell
- P321: Specific treatment (see supplemental first aid instructions on this label)
- P332+P313: If skin irritation occurs: Get medical advice/attention
- P337+P313: If eye irritation persists: Get medical advice/attention
- P362+P364: Take off contaminated clothing and wash it before reuse
- P403+P233: Store in a well-ventilated place. Keep container tightly closed
- P405: Store locked up
- P410+P403: Protect from sunlight. Store in a well-ventilated place
- P501: Dispose of contents/container to an approved waste disposal plant
- P502: Refer to manufacturer/supplier for information on recovery/recycling
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
SynQuest Laboratories, Inc.
manufacturer
P.O. Box 309, Alachua, FL 32615 - United States of America
US
(386) 462-0788
(386) 462-7097
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
3E Company - Account 10069
(844) 523-4086
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Chlorotrifluoromethane | 75-72-9 | 100% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove person to fresh air and keep comfortable for breathing. If not breathing, give artificial respiration. Get immediate medical advice/attention.
Symptoms:
May cause drowsiness or dizziness.
🖐️ Skin Contact
Thaw frosted parts with lukewarm water. Do not rub affected area. Get immediate medical advice/attention.
Symptoms:
Contact with the liquid may cause cold burns/frostbite.
👁️ Eye Contact
Remove contact lenses, if present and easy to do. Continue rinsing. Immediately flush eyes thoroughly with water for at least 15 minutes. Get immediate medical advice/attention.
Symptoms:
Direct contact with the liquefied gas may cause severe and possibly permanent eye injury due to frostbite from rapid liquid evaporation.
🍽️ Ingestion/Swallowing
Due to its physical form, exposure to this chemical is not likely. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth out with water. Get medical advice/attention.
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
✅ Suitable Extinguishing Media
Alcohol resistant foam. Carbon dioxide. Dry powder. Water spray. Use extinguishing media appropriate for surrounding fire.
⚠️ Specific Fire Hazards
Thermal decomposition generates: Carbon oxides. Hydrogen fluoride.
🔥 Fire Fighting Instructions
In case of fire: Evacuate area. Fight fire remotely due to the risk of explosion.
🛡️ Firefighter Protection Equipment
Wear gas tight chemically protective clothing in combination with self contained breathing apparatus. For further information refer to section 8: "Exposure controls/personal protection".
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
🚨 Emergency Procedures
Gas/vapor heavier than air. May accumulate in confined spaces, particularly at or below ground level.
🌍 Environmental Precautions
Avoid release to the environment. Notify authorities if product enters sewers or public waters.
🧹 Cleanup Methods
Ventilate area.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
⚠️ Handling Precautions
• Do not handle until all safety precautions have been read and understood.
• Ensure good ventilation of the work station.
• Do not breathe fumes, gas, mist, spray, vapors.
• Wear personal protective equipment.
• Avoid contact with skin and eyes.
🏪 Storage Conditions
• Protect from sunlight.
• Do not expose to temperatures exceeding 50 ℃.
• Keep container closed when not in use.
🧼 General Hygiene Measures
Handle in accordance with good industrial hygiene and safety procedures. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure good ventilation of the work station. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Systems under pressure should be regularily checked for leakage. Oxygen detectors should be used when asphyxiating gases may be released.
🧤 Hand Protection
Protective gloves. 29 CFR 1910.138: Hand Protection.
👁️ Eye Protection
Chemical goggles or safety glasses. Face shield. 29 CFR 1910.133: Eye and Face Protection.
😷 Respiratory Protection
In case of inadequate ventilation wear respiratory protection. 29 CFR 1910.134: Respiratory Protection.
🦺 Skin/Body Protection
Wear suitable protective clothing.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
✅ Chemical Stability
The product is stable at normal handling and storage conditions.
🚫 Conditions to Avoid
Protect from sunlight. Do not expose to temperatures exceeding 50 ℃. Keep away from heat, sparks and flame.
🧪 Incompatible Materials
Alkali metals. Finely divided metals (Al, Mg, Zn). Strong oxidizing agents.
💨 Hazardous Decomposition Products
Under normal conditions of storage and use, hazardous decomposition products should not be produced. Hazardous decomposition products in case of fire, see Section 5.
Ecological Information & Environmental Impact
Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data
🌱 Toxicity
🌱 Persistence and degradability
🌱 Bioaccumulative potential
🌱 Mobility in soil
🌱 Other adverse effects
Waste Disposal & Treatment Methods
Waste disposal procedures, treatment methods, and regulatory compliance requirements
♻️ Waste Treatment Methods
Remove to an authorized incinerator equipped with an afterburner and a flue gas scrubber.
🗂️ Product Disposal Recommendations
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1022
📦 Proper Shipping Name
Chlorotrifluoromethane
⚠️ Transport Hazard Class
2.2
Regulatory Information & Compliance
Chemical regulations, safety assessments, and regulatory compliance status
📋 Regulatory Summary
Chlorotrifluoromethane (75-72-9) is listed on various chemical inventories and is subject to reporting requirements under US federal regulations.
❌ Chemical Safety Assessment
No chemical safety assessment has been performed for this substance.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Chlorotrifluoromethane?
The signal word for this substance is "warning".
What is the physical form of Chlorotrifluoromethane?
Chlorotrifluoromethane is a gas .
What is Chlorotrifluoromethane used for?
Laboratory chemicals, Manufacture of substances, Scientific research and development
What are the hazard statements for Chlorotrifluoromethane?
This substance has 7 hazard statements: H280: Contains gas under pressure; may explode if heated H315: Causes skin irritation H319: Causes serious eye irritation H335: May cause respiratory irritation H336: May cause drowsiness or dizziness May displace oxygen and cause rapid suffocation H420: Harms public health and the environment by destroying ozone in the upper atmosphere
What is the melting point of Chlorotrifluoromethane?
The melting point is - 181 ℃ and the boiling point is - 81.4 ℃.