Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Isobionics® Natural α-Bisabolene 98
- Chemical Name
- Cyclohexene, 4-(1,5-dimethyl-1,4-hexadien-1-yl)-1-methyl-
Regulatory Identifiers
- CAS Number
- 17627-44-0 Check regulations →
Identified Uses
flavoring substance
Uses advised against
Any other use is not compliant.
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-48434
Emergency Contacts
International emergency number
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Cyclohexene, 4-(-1,5-dimethyl-1,4-hexadien-1-yl)-1-methyl- (Content (W/W): <= 100 %)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cyclohexene, 4-(-1,5-dimethyl-1,4-hexadien-1-yl)-1-methyl- | 17627-44-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Immediately wash thoroughly with soap and water, seek medical attention.
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Immediate Medical Attention
Seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, dry powder
water jet
carbon oxides, harmful vapours. The substances/groups of substances mentioned can be released in case of fire.
Cool endangered containers with water-spray.
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Do not breathe vapour/spray. Avoid contact with the skin, eyes and clothing.
Contain with absorbent material (e.g. sand, silica gel, acid binder, general purpose binder, sawdust).
Dike spillage. Pump off product.
Do not discharge into drains/surface waters/groundwater.
Dispose of absorbed material in accordance with regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure thorough ventilation of stores and work areas. Wear suitable protective clothing and eye/face protection. Avoid contact with the skin, eyes and clothing. Keep container tightly sealed.
Keep container tightly closed and dry. Keep in a cool, well-ventilated place. Protect from direct sunlight.
Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc. Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types. butyl rubber (butyl) - 0.7 mm coating thickness
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: Corrosive effects to metal are not anticipated.
No hazardous reactions if stored and handled as prescribed/indicated.
See SDS section 7 - Handling and storage.
oxidizing agents, acids, alkalies
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Observe national and local legal requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (6-METHYL-2-(4-METHYLCYCLOHEX-3-ENYL)HEPT-2,5-DIENE)
- Transport Class
- 9
- Packing Group
- III
None known
EmS: F-A; S-F
None known
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture. If other regulatory information applies that is not already provided elsewhere in this safety data sheet, then it is described in this subsection.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Isobionics® Natural α-Bisabolene 98?
The signal word is danger.
What is the physical form of Isobionics® Natural α-Bisabolene 98?
Isobionics® Natural α-Bisabolene 98 is a liquid appearing as clear with colourless to pale yellow clear color. It has oily, of coconut, vanilla-like, of milk odor.
What is the solubility of Isobionics® Natural α-Bisabolene 98?
of very low solubility
What is Isobionics® Natural α-Bisabolene 98 used for?
flavoring substance
What are the hazard statements for Isobionics® Natural α-Bisabolene 98?
This substance has 6 hazard statements:
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H332: Harmful if inhaled.
- H401: Toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Isobionics® Natural α-Bisabolene 98?
The melting point is 6,1 °C and the boiling point is 276 °C.