Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AquaSolve
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning of spray guns, water-based. For professional use only
Manufacturers & Suppliers
Reniderm Scandinavia AB
manufacturer
Boarp, 523 60 Gällstad
+46 321 705 25, +46 (0)70 2233587
http://www.reniderm.se
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-butoxyethanol EC: 203-905-0 | 111-76-2 | 75 - 100% | Yes |
| 2-propanol EC: 200-661-7 | 67-63-0 | 5% | Yes |
| methyl-1H-benzotriazole EC: 249-596-6 | 29385-43-1 | 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. Seek medical advice in case of discomfort. If breathing is irregular or stopped, administer artificial respiration. If unconscious, place in the recovery position.
Wash the affected areas with soap and copious amounts of water. Seek medical advice in case of discomfort.
Immediately rinse the affected eyes with copious amounts of water, including under the eye lids, for at least five minutes. Seek medical advice.
Wash out mouth and drink copious amounts of water. Do not induce vomiting upon ingestion - seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water mist, alcohol-resistant foam, powder or carbon dioxide.
Vapours may form explosive mixtures with air.
Cool sealed containers exposed to fire using water mist.
Firefighter Protection
In case of fire, use self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter surface water or drains. Do not allow to penetrate the ground/soil.
Absorb spills with absorbent material. Store in suitable sealed containers for disposal.
Materials: sand, diatomaceous earth, acid binder, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety procedures. Avoid contact with skin and eyes. Store packaging tightly sealed. Avoid breathing vapours and spray mist. Do not eat, drink or smoke when using this product. Wash hands before breaks and at the end of work. Take off immediately all contaminated clothing.
Store in areas with solvent-resistant flooring. Store in original containers. Store tightly sealed in a cool, dry place. Store in a well-ventilated place. Protect from light. Peroxides are formed through reaction with air. The product is hygroscopic.
Do not eat, drink or smoke when using this product. Wash hands before breaks and at the end of work. Take off immediately all contaminated clothing.
Flammable liquid. Vapours may form explosive mixtures with air. Vapours are heavier than air and can spread along the floor. Keep separate from ignition sources - Smoking is prohibited. Implement measures to prevent the accumulation of electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable protective gloves. Note the manufacturer's information concerning permeability, breakthrough time and specific workplace conditions. (mechanical wear, contact time). Replace protective gloves at first sign of wear. Material: butyl rubber, Breakthrough time: >= 8 hours, Glove thickness: 0.5mm. Material: fluororubber, Breakthrough time: >= 8 hours, Glove thickness: 0.4 mm.
Wear eye protection in case of risk of direct contact or splashes.
Use suitable respiratory protection in case of inadequate ventilation. Recommended filter type: A
Wear solvent-resistant protective clothing when necessary.
Do not allow to enter surface water or drains. Do not allow to penetrate the ground/soil. Inform the relevant authorities if the product contaminates watercourses and lakes or drains. Inform the local authorities if the material comes into contact with the ground.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under the recommended storage and handling conditions.
No information available.
May form explosive peroxides. Releases hydrogen gas upon reaction with basic metals (zinc, aluminium). Do not mix with oxidising substances.
Heat, flames and sparks. Exposure to light.
Strong oxidising agents, alkalis, light metals, aluminium
Not determined.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AquaSolve?
The signal word is warning.
What is the physical form of AquaSolve?
AquaSolve is a liquid appearing as liquid with colourless color. It has characteristic odor.
What is the solubility of AquaSolve?
Soluble in water.
What is AquaSolve used for?
Cleaning of spray guns, water-based. For professional use only
What are the hazard statements for AquaSolve?
This substance has 5 hazard statements:
- H302: Harmful if swallowed.
- H312: Harmful in contact with skin.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
What is the melting point of AquaSolve?
The melting point is Not determined and the boiling point is Not determined.