Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Xylene (isomers) AGR, ACS, ISO, Ph.Eur.
- Product Form
- Substance
- Product Code
- XYLN-00A
- Chemical Name
- xylene
Regulatory Identifiers
- CAS Number
- 1330-20-7 Check regulations →
- EC Number
- 215-535-7 Check regulations →
- REACH No.
- 01-2119488216-32
Identified Uses
Laboratory use
Manufacturers & Suppliers
labbox labware s.l.
distributor
Migjorn, 1, 08338 Premia de Dalt, SPAIN
+34 937 07 79 70
http://www.labbox.com
Emergency Contacts
Emergency Contact
+34 937 077 970
For technical information_Office Hours
local emergency number
112
National Poisons Information Service (Belfast Centre) Royal Victoria Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Multi-constituent
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylene (isomers ) EC: 215-535-7 | 1330-20-7 | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Call a physician immediately.
Take off contaminated clothing. Wash skin with plenty of water.
Immediately rinse with water for a prolonged period while holding the eyelids wide open. Consult an eye specialist.
Do not induce vomiting/risk of damage to lungs exceeds poisoning risk. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder. Carbon dioxide.
Combustible liquid. Vapours are heavier than air and may spread along floors. Can form explosive mixtures with air.
Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if safe to do so. Ventilate area.
Prevent entry to sewers and public waters.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharge. Provide adequate ventilation to minimize dust and/or vapour concentrations.
Store in a well-ventilated place. Keep container tightly closed. Store away from heat. Store in a cool, well-ventilated place. Store in a dry area.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station. Do not inhale vapour.
protective gloves. EN 374.
Safety glasses
Wear appropriate mask
Wear suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No additional information available
No additional information available
Heating may cause an explosion.
No additional information available
No additional information available
No additional information available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must follow special treatment according to local regulation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1307
- Shipping Name
- XYLENES
- Transport Class
- 3
- Packing Group
- III
Stowage category (IMDG) : A, Flash point (IMDG) : 23C to 30C c.c., Properties and observations (IMDG) : Colourless liquids. Flashpoint: 23C to 30C c.c. Explosive limits: 1.1% to 7%. Immiscible with water.
ERG code (IATA) : 3L
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Xylene (isomers) AGR, ACS, ISO, Ph.Eur.?
The signal word is warning.
What is the physical form of Xylene (isomers) AGR, ACS, ISO, Ph.Eur.?
Xylene (isomers) AGR, ACS, ISO, Ph.Eur. is a liquid with colourless. color. It has not available odor.
What is the solubility of Xylene (isomers) AGR, ACS, ISO, Ph.Eur.?
Soluble.
What is Xylene (isomers) AGR, ACS, ISO, Ph.Eur. used for?
Laboratory use
What are the hazard statements for Xylene (isomers) AGR, ACS, ISO, Ph.Eur.?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H312: Harmful in contact with skin.
- H315: Causes skin irritation.
- H332: Harmful if inhaled.
What is the melting point of Xylene (isomers) AGR, ACS, ISO, Ph.Eur.?
The melting point is -34 °C and the boiling point is 137 (≤ 0) °C.