NextSDS Logo
Safety Data Sheet EN

RED HOT BLUE GLUE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RED HOT BLUE GLUE
Product Form
Medium Body PVC Plastic Cement

Regulatory Identifiers

CAS Number
N/A

Identified Uses

PVC solvent cement adhesive

Manufacturers & Suppliers

T Christy Enterprises, Inc. logo

T Christy Enterprises, Inc.

manufacturer

655 East Ball Road, Anaheim CA 92805, United States

714-507-3300

tchristy.com

Emergency Contacts

CHEMTEL

(800) 255-3924

24 Hours

CHEMTEL

(813) 248-0585

24 Hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2
Carc. Cat. 2
STOT SE Cat. 3
Flam. Liq. Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapor.
H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H351 Suspected of causing cancer.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P201 Obtain special instructions before use.
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/eye protection/face protection.
P301 + P312 If swallowed: Call a poison center/doctor if you feel unwell.
P302 + P352 If on skin: Wash with plenty of water.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
P304 + P340 If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a poison center/doctor if you feel unwell.
P321 Specific treatment (see on this label).
P330 Rinse mouth.
P362 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use sand, carbon dioxide or powder extinguisher to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container to industrial combustion plant.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Description of the mixture

Chemical Name CAS Number Concentration Hazardous
tetrahydrofuran 109-99-9 50 - 75% Yes
cyclohexanone 108-94-1 10 - 25% Yes
methyl ethyl ketone 78-93-3 5 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.

Skin contact

Wash with plenty of soap and water.

Eye contact

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.

Ingestion

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, BC-powder, Carbon dioxide (CO2)

Unsuitable media

Water jet

Specific hazards

In case of insufficient ventilation and/or in use, may form flammable/explosive vapor-air mixture. Solvent vapors are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures.

Instructions

Coordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

In case of fire and/or explosion do not breathe fumes.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder.

Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use local and general ventilation. Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Use only in well-ventilated areas. Due to danger of explosion, prevent leakage of vapours into cellars, flues and ditches. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.

Storage

Keep container tightly closed and in a well-ventilated place. Keep cool. Protect from sunlight.

Hygiene

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

Fire prevention

Keep away from sources of ignition - No smoking. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Take precautionary measures against static discharge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

General ventilation.

Hands

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.

Eyes

Wear eye/face protection.

Respiratory

In case of inadequate ventilation wear respiratory protection.

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Flash Point
-21.2 °C at 101.3 kPa, -6.16 °F at 101.3 kPa
Physical State
liquid
Boiling Point
65 °C at 101.3 kPa
Properties Status
---
Softening Point
---
Kinematic Viscosity
---
Vapor Pressure
17 kPa at 20 °C
Odor
characteristic
Relative Density
---
Bulk Density
---
Solubility In Fat
---
Molecular Weight
---
Solubility In Water
---
Odor Threshold
---
Partition Coefficient
this information is not available
Freezing Point
not determined
Auto Ignition Temperature
215 °C (auto-ignition temperature (liquids and gases))
Flammability
not relevant, (fluid)
Upper Explosive Limit
---
Relative Evaporation Rate
---
Crystallisation Point
---
Lower Explosive Limit
---
Voc Content
<= 510 g/L
Evaporation Rate
not determined
Ph
not determined
Dynamic Viscosity
500 – 700 cP at 73 °F
Solidification Point
---
Explosive Limits
---
Colour
blue
Metal Corrosion
---
State Under Standard Conditions
---
Decomposition Temperature
---
Form
---
Appearance
liquid, blue, characteristic
Solubility
not determined
Vapor Density
this information is not available
Physical State Data
liquid
Melting Point
not determined
Density
0.944 g/cm³ at 73 °F
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

See below "Conditions to avoid".

Reactivity

Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials". The mixture contains reactive substance(s). Risk of ignition. If heated: Risk of ignition

Hazardous reactions

No known hazardous reactions.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Hints to prevent fire or explosion: Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge.

Incompatible

Oxidizers

Decomposition

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Solvent reclamation/regeneration.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1133
Shipping Name
Adhesives
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for RED HOT BLUE GLUE?

The signal word is danger.

What is the physical form of RED HOT BLUE GLUE?

RED HOT BLUE GLUE is a liquid appearing as liquid, blue, characteristic with blue color. It has characteristic odor.

What is the solubility of RED HOT BLUE GLUE?

not determined

What is RED HOT BLUE GLUE used for?

PVC solvent cement adhesive

What are the hazard statements for RED HOT BLUE GLUE?

This substance has 6 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H351: Suspected of causing cancer.

What is the melting point of RED HOT BLUE GLUE?

The melting point is not determined and the boiling point is 65 °C at 101.3 kPa.