Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
JENBACHER GEO 40 commonly used natural gas engine oil.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
GHS Hazard Pictograms & Safety Symbols
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
Precautionary Statements
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
ExxonMobil Petroleum & Chemical BVBA
national supplier
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
(+44) 870 8200418
GB
24 Hour
Emergency Contact
(+353) 19014670
IE
24 Hour
National Poison Control Centre
111
GB
National Poison Control Centre
(+353)1 809 2166
IE
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Reportable hazardous substance(s) complying with the classification criteria and/or with an exposure limit (OEL)
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-PENTANOL, 4-METHYL-, HYDROGEN PHOSPHORODITHIOATE, ZINC SALT EC: 218-679-9 | 2215-35-2 | 0.1-1% | ⚠️ Hazardous |
| reaction mass of isomers of: C7-9-alkyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate EC: 406-040-9 | 125643-61-0 | 1-5% | ⚠️ Hazardous |
| C14-16-18 ALKYL PHENOL EC: 931-468-2 | 1190625-94-5 | 0.1-1% | ⚠️ Hazardous |
| CALCIUM LONG CHAIN ALKYL PHENATE SULPHIDE EC: 701-251-5 | 68784-26-9 | 1-5% | ⚠️ Hazardous |
Composition Notes
Note - any classification in brackets is a GHS building block that was not adopted by the EU in the CLP regulation (No 1272/2008) and therefore is not applicable in the EU or in non-EU countries which have implemented the CLP regulation and is shown for informational purposes only. Note: See SDS Section 16 for full text of hazard statements.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove from further exposure. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.
Symptoms:
respiratory irritation, dizziness, nausea, or unconsciousness
🖐️ Skin Contact
Wash contact areas with soap and water. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency.
👁️ Eye Contact
Flush thoroughly with water.
Symptoms:
irritation
🍽️ Ingestion/Swallowing
First aid is normally not required. Seek medical attention if discomfort occurs.
Symptoms:
discomfort
🚨 Immediate Medical Attention Required
If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency.
Medical Treatment
early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Control measures to consider: No special requirements under ordinary conditions of use and with adequate ventilation.
🧤 Hand Protection
Any specific glove information provided is based on published literature and glove manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions. Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves. The types of gloves to be considered for this material include: No protection is ordinarily required under normal conditions of use.
👁️ Eye Protection
If contact is likely, safety glasses with side shields are recommended.
😷 Respiratory Protection
If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators to be considered for this material include: No special requirements under ordinary conditions of use and with adequate ventilation. For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.
🦺 Skin/Body Protection
Any specific clothing information provided is based on published literature or manufacturer data. The types of clothing to be considered for this material include: No skin protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precautions should be taken to avoid skin contact.
🌍 Environmental Exposure Controls
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for JENBACHER GEO 40?
The signal word for this substance is "no signal word".
What is the physical form of JENBACHER GEO 40?
JENBACHER GEO 40 is a liquid with colourless color. It has characteristic odor.
What is the solubility of JENBACHER GEO 40?
water Negligible
What is JENBACHER GEO 40 used for?
Natural gas engine oil
What is the melting point of JENBACHER GEO 40?
The melting point is Not technically feasible and the boiling point is - 288C (550F) [Estimated].