Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARMOSTAT 300-XE50
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- QK82-704Q-N002-KVJP
Identified Uses
Antistatic additive
Manufacturers & Suppliers
Nouryon Functional Chemicals B.V.
manufacturer
Zutphenseweg 10, NL 7418 AJ Deventer, Netherlands
+31889840367
Emergency Contacts
Emergency Contact
+31 57 06 79211
24 hours
US-CHEMTREC
1-800-424-9300
CA-CANUTEC
1-613-996-6666
Emergency Contact
+81 (836) 74 8810
化学事故应急咨询电话
+86 532 8388 9090
Nouryon Emergency Response Centre
+31 570 679211
Poison Centre
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bis (2-hydroxyethyl) tallow alkylamine EC: 263-177-5 | 61791-44-4 | 48 - 52% | Yes |
| Tallowamine | 61790-33-8 | 0.4 - 0.6% | Yes |
The following substances have multiple CAS-number: Bis (2-hydroxyethyl) tallow alkylamine : 1218787-32-6; Tallowamine : 68037-95-6
First Aid Measures
Emergency procedures for chemical exposure incidents
Obtain medical attention immediately.
Take off contaminated clothing and shoes immediately. Wash skin immediately with 0,5 % acetic acid in water, and then with soap and water.
Symptoms: Skin irritation, if untreated may be prolonged and serious (eg necrosis).
In case of contact with eyes, rinse immediately with 0.5% acetic acid in water for a few minutes, followed by rinsing with plenty of water for as long as possible. Eyelids should be held away from the eyeball to ensure thorough rinsing. Get medical attention immediately. Continue to rinse during transport. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Take victim immediately to hospital. Do not induce vomiting!
Symptoms: May cause chemical burns in mouth and throat.
Immediate Medical Attention
Immediate medical attention is required. Obtain medical attention immediately. Get medical attention immediately. Take victim immediately to hospital.
Medical Treatment
Immediate medical treatment is necessary. This may be prevented by early treatment with medium strength corticosteroids.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Treat as oil fire. Water spray may be ineffective unless used by experienced firefighters.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Only qualified personnel equipped with suitable protective equipment may intervene. Prevent unauthorised persons entering the zone.
Do not flush into surface water or sanitary sewer system. Discharge into the environment must be avoided.
Pick up and arrange disposal without creating dust. Keep in suitable, closed containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. Avoid formation of respirable particles. Do not breathe vapours/dust. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.
Keep container tightly closed in a dry and well-ventilated place. Avoid elevated temperatures.
Smoking, eating and drinking should be prohibited in the application area.
Provide appropriate exhaust ventilation at places where dust is formed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide eyewash station and safety shower. Keep solutions of 0.5% acetic acid in water close at hand.
Material : Nitrile rubber Material : butyl-rubber
Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems.
Wear full face mask supplied with: Combination filter: ABEKP.
Protective suit
Do not flush into surface water or sanitary sewer system. Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Extremes of temperature and direct sunlight.
Reacts with copper, aluminium, zinc and their alloys.
No hazardous decomposition products are known. Thermal decomposition: No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product and its components, Bis (2-hydroxyethyl) tallow alkylamine and Tallowamine, are not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with local regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3259
- Shipping Name
- AMINES, SOLID, CORROSIVE, N.O.S. (Tallowbis(2-hydroxyethyl)amine)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARMOSTAT 300-XE50?
The signal word is danger.
What is the physical form of ARMOSTAT 300-XE50?
ARMOSTAT 300-XE50 is a dustless granules with white color. It has amine-like odor.
What is the solubility of ARMOSTAT 300-XE50?
No data available
What is ARMOSTAT 300-XE50 used for?
Antistatic additive
What are the hazard statements for ARMOSTAT 300-XE50?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of ARMOSTAT 300-XE50?
The melting point is > 120 °C and the boiling point is No data available.