Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Absorbit
- Product Code
- 103960E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Heavy duty cleaner
Manufacturers & Suppliers
Ecolab Ltd.
distributor
David Murray John Building, UK-SN1 1NH Swindon, Wiltshire, England
+44 (0)1793 511221
Emergency Contacts
Ecolab Ltd.
01793 511221
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
≥15 - <30% phosphates, <5% non-ionic surfactants, Contains Perfumes: (Limonene)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Disodium metasilicate EC: 229-912-9 | 6834-92-0 | 30 - 50% | Yes |
| Sodium carbonate EC: 207-838-8 | 497-19-8 | 30 - 50% | Yes |
| Phosphates | 10101-89-0 | 20 - 25% | Yes |
| Fattyalcohol ethoxylates > 5EO | --- | 1 - 2% | Yes |
Occupational exposure limits, if available, are listed in section 8.
Notes
See section 16 for the full text of the R-phrases declared above
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. In all cases of doubt, or when symptoms persist, seek medical attention.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately.
In case of contact with eyes, rinse immediately with plenty of water. Get medical attention immediately.
Do not induce vomiting unless directed to do so by medical personnel. If swallowed, rinse mouth with water (only if the person is conscious).
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
Not available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray (fog), foam or dry chemical
Firefighter Protection
Fire-fighters should wear proper protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Immediately contact safety personnel.
Rinse with plenty of running water.
For large spills dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Place spilt material in an appropriate container for disposal.
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.
Rinse with plenty of running water. Place spilt material in an appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get in eyes, on skin or on clothing. Do not breathe dust. After handling, always wash hands thoroughly with soap and water. Handle and open container with care.
Keep container tightly closed. Keep away from food, drink and animal feeding stuffs. Keep only in the original container. Store between 10 and 40°C.
After handling, always wash hands thoroughly with soap and water.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
1 - 4 hours: butyl rubber, nitrile rubber (EN 374)
Safety glasses. Goggles, face shield, or other full-face protection (EN 166)
A respirator is not needed under normal and intended conditions of product use (EN 143, 141)
safety apron. Suitable protective footwear (EN 467)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Highly reactive or incompatible with the following materials: acids. Slightly reactive or incompatible with the following materials: organic materials, alkalis and moisture. Non-reactive or compatible with the following materials: metals. Do not mix with other products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste must be disposed of according to applicable regulations.
Use as much of the contents as possible, according to instructions.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3253
- Shipping Name
- DISODIUM TRIOXOSILICATE mixture
- Transport Class
- 8
- Packing Group
- III
Follow special pack instructions for air transport.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EU regulations: Corrosive, Contains Disodium metasilicate, Risk Phrases R34, R37, Safety phrases S2, S22, S26, S36/37/39, S45. National regulations: The Chemicals (Hazard Information and Packaging for Supply) Regulations, The Control of Substances Hazardous to Health Regulations, Health and Safety at Work Act.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Absorbit?
The signal word is na: r-phrases.
What is the physical form of Absorbit?
Absorbit is a solid. (powder.) appearing as solid. (powder.) with orange. (light.) color. It has aromatic. odor.
What is the solubility of Absorbit?
Not available.
What is Absorbit used for?
Heavy duty cleaner
What is the melting point of Absorbit?
The melting point is Not available. and the boiling point is Not available..