Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Armaflex HT625
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive for processing all flexible Armaflex insulation materials (except Armaflex Ultima)
Uses advised against
No data available.
Manufacturers & Suppliers
Armacell GmbH
manufacturer
Robert-Bosch-Straße 10, 48153 Münster
+49 (0) 251 - 7603-200
Emergency Contacts
Giftinformationszentrum Nord
+49 (0)551 192 40
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethyl-acetate EC: 205-500-4 | 141-78-6 | 30 - 50% | Yes |
| butanone EC: 201-159-0 | 78-93-3 | 10 - 30% | Yes |
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane EC: 921-024-6 | --- | 10 - 30% | Yes |
| Hydrocarbons, C6, isoalkanes, <5% n-hexane EC: 931-254-9 | --- | 5 - 10% | Yes |
| Colophony EC: 232-475-7 | 8050-09-7 | 0.5 - 1% | Yes |
| zinc oxide EC: 215-222-5 | 1314-13-2 | 0.5 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
When inhaled remove to fresh air and seek medical aid.
When in contact with the skin, clean with soap and water.
Remove contact lenses, irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart and seek medical advice.
Do not induce vomiting. Call a doctor immediately.
Immediate Medical Attention
No data available.
Medical Treatment
No data available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product . Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturers instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves. Appropriate Material nitrile
Safety glasses with side protection shield (EN 166)
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of insufficient ventilation and during spray application respiratory protection necessary. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified. Respirator A2/P2
Normal chemical work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Armaflex HT625?
The signal word is danger.
What is the physical form of Armaflex HT625?
Armaflex HT625 is a liquid with colourless color. It has of solvents odor.
What is the solubility of Armaflex HT625?
No data available
What is Armaflex HT625 used for?
Adhesive for processing all flexible Armaflex insulation materials (except Armaflex Ultima)
What are the hazard statements for Armaflex HT625?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Armaflex HT625?
The melting point is No data available and the boiling point is Value appr. 60 - 95 C R 4 efere 60 nce substance Naphtha 95.