Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Advantra® PHC-9256
- Product Code
- 100000002060
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hot melt adhesive
Uses advised against
For industrial use only.
Manufacturers & Suppliers
H.B. Fuller Company
manufacturer
1200 Willow Lake Boulevard, Vadnais Heights, MN 55110
1-888-423-8553
Emergency Contacts
Medical Emergency
1-888-853-1758
24 Hours
Transport Emergency (CHEMTREC)
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Paraffin waxes and Hydrocarbon waxes | 8002-74-2 | 20 - 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Wash off with soap and water. Cool melted product on skin with plenty of water. Do not remove solidified product.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care provider with this SDS.
Medical Treatment
Use mineral oil to soften and loosen product for removal.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Do NOT use water jet.
Burning produces irritant fumes.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8.
Allow to solidify.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing vapors/fumes of heated product. Prevent contact with molten product.
Keep in a dry, cool place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
At the application temperature, use of local exhaust over the premelting reservoir is encouraged.
Material: Protective gloves. Remarks: When handling hot material, use heat resistant gloves.
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment. Filter type: Particulates type
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
Hazardous polymerization does not occur.
Protect from frost.
Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Solidify and dispose of in an approved landfill.
Solidify and dispose of in an approved landfill. Consult state, local or provincial authorities for more restrictive requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Advantra® PHC-9256?
The signal word is no signal word.
What is the physical form of Advantra® PHC-9256?
Advantra® PHC-9256 is a solid form appearing as solid form with light amber color. It has characteristic odor.
What is the solubility of Advantra® PHC-9256?
insoluble
What is Advantra® PHC-9256 used for?
Hot melt adhesive