Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Mineral oil
- Product Code
- SLM1027, SLM2404
- Synonyms
- Drakeol (R) 7; White Mineral Oil; Mineral Oil, light, white
Regulatory Identifiers
- CAS Number
- 8042-47-5 (previous 8012-95-1) Check regulations →
Manufacturers & Suppliers
Sciencelab.com, Inc.
distributor
14025 Smith Rd., Houston, Texas 77396
1-281-441-4400
http://ScienceLab.com
Emergency Contacts
CHEMTREC
1-800-424-9300
24HR
International CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mineral oil | 8042-47-5 | 100% | No |
Notes
Toxicological Data on Ingredients: Not applicable.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Wash with soap and water. Get medical attention if irritation develops.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam.
Do not use water jet.
May be combustible at high temperature. Slightly flammable to flammable in presence of open flames and sparks, of heat.
SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not breathe gas/fumes/ vapor/spray. Keep away from incompatibles such as oxidizing agents.
Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not store above 24°C (75.2°F).
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value.
Gloves
Safety glasses, Splash goggles
Lab coat, Full suit, Boots
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
Reactive with oxidizing agents.
Will not occur.
Excess heat, incompatibles
oxidizing agents
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Mineral oil known by?
Mineral oil is also known as: Drakeol (R) 7; White Mineral Oil; Mineral Oil, light, white
What is the hazard signal word for Mineral oil?
The signal word is no signal word.
What is the physical form of Mineral oil?
Mineral oil is a liquid appearing as transparent water-white liquid with clear color. It has odorless odor.
What is the solubility of Mineral oil?
Insoluble in cold water. Soluble in hydrocarbons.
What is the melting point of Mineral oil?
The melting point is Not available. and the boiling point is 310°C (590°F).