Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CORRSHIELD MD4151
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion inhibitor
Uses advised against
None known.
Manufacturers & Suppliers
GE Water & Process Technologies BVBA
manufacturer
Toekomstlaan 54, Industriepark Wolfstee, 2200 HERENTALS
+32 14 / 25 91 11
Emergency Contacts
Emergency Contact
+44(0)1235 239670
24/7
Emergency Contact
+44(0)1235 239671
24/7
ANTIGIFCENTRUM
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous alkaline solution of inorganic salts
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide EC: 215-185-5 | 1310-73-2 | 0.5 - 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Remove contaminated clothing. Wash immediately with plenty of water. If irritation persists, seek medical advice.
Flush immediately with plenty of running water. Keep eyelids apart. If irritation persists, seek medical advice.
Immediately give 1-2 glasses of water, if victim is fully conscious. Do NOT induce vomiting!
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry chemicals, foam, water spray (fog).
Not available.
Oxides of carbon evolved in fire.
Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection
Self contained breathing apparatus. (CEN : EN 137) Protective clothing (CEN : EN 469) Protective gloves (CEN : EN 659) Helmet (CEN : EN 443)
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Wear protective clothing, gloves and safety goggles. For emergency responders: Use personal protection recommended in Section 8 of the MSDS.
Prevent from entering sewers or the immediate environment. Accidental release of large quantities into the aquatic environment may harm aquatic organisms.
Absorb onto inert material
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Alkaline. Do not mix with acidic material.
Protect from freezing. Store containers closed when not in use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Adequate ventilation to maintain air contaminants below exposure limits.
Neoprene gloves (Protection against unintentional short-term contact) Nitrile gloves (Protection against unintentional short-term contact) Rubber gloves (Protection against unintentional short-term contact) CEN: EN 374-1/2/3; EN 420
Safety goggles. CEN: EN 166
In case of insufficient ventilation, use a breathing mask with filter type: P2 CEN: EN 140; EN 143; EN 149
Protective clothing. CEN: EN 340; EN 369; EN 465
Prevent from entering in public sewers or the immediate environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
Not available.
Not applicable.
Protect from freezing.
Avoid contact with strong oxidisers.
Oxides of carbon evolved in fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6. Other adverse effects
Not available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
According to Hazardous Waste Regulations.
According to Hazardous Waste Regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3266
- Shipping Name
- Corrosive liquid, basic, inorganic, n.o.s. (Sodium hydroxide, Mixture)
- Transport Class
- 8
- Packing Group
- III
Not available.
Not available.
Not available.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CORRSHIELD MD4151?
The signal word is warning.
What is the physical form of CORRSHIELD MD4151?
CORRSHIELD MD4151 is a liquid with colourless to yellow color. It has mild odor.
What is CORRSHIELD MD4151 used for?
Corrosion inhibitor
What are the hazard statements for CORRSHIELD MD4151?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of CORRSHIELD MD4151?
The melting point is -3 °C and the boiling point is 104 °C.