Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alcochem glueboards for light traps
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Alcochem glue boards for light traps for Industrial uses: Uses of substances as such or in preparations at industrial sites. Formulation (mixing) of preparations and/or re-packaging (excluding alloys).
Uses advised against
Not intended for use in products for which prolonged contact with mucous membranes, body fluids or abraded skin is intended.
Manufacturers & Suppliers
Alcochem Hygiene
manufacturer
Zeilmaker 4, 3861 SM Nijkerk, The Netherlands
(+31)33 299 41 39
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate | --- | 0.1 - 1% | Yes |
| 2-(2H-benzotriazol-2-YL)-4-6-ditertpentylphenol | 25973-55-1 | 0.1 - 1% | Yes |
| Non hazardous polymers, tackifying resins, waxes, oils and stabilisers | --- | 98% | No |
Notes
The full text for all H-phrases is displayed in section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
If exposed to excessive levels of fume from hot product remove to fresh air and get medical attention. Cold product does not pose an inhalation hazard.
For contact with cold product wash the skin immediately with soap and water. Get medical attention if irritation develops and persists. If burned by contact with hot material, cool molten material adhering to skin as quickly as possible with water and seek medical advice for removal of adhering material and treatment of burn. Adhesive may be softened with olive oil or liquid paraffin. When hot melt removed treat as thermal burn.
If hot product enters eye flush area with large quantity of clean, cold water. Urgently seek medical assistance. Due to the format of the product (blocks) cold product will not enter the eyes.
In the unlikely event of ingestion seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical powder, Carbon dioxide, Earth, Sand, Foam
Water should not be used as burning product may float on water.
Harmful vapours including Carbon dioxide, Carbon monoxide, Smoke, Low molecular weight hydrocarbons.
Firefighter Protection
Self contained respiratory equipment should be worn.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent material from entering watercourses or sewers.
Clean up spilled material and place in suitable containers for reuse or disposal. If hot product is spilt allow to cool and take up mechanically.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Adhesive mixture for producing glueboards for U.V. lamps.
---
AF Cockroach & Crawling Insect Monitor Glue Pad
---
LYRECO glue sticks
---
EMPE-glue
---
MASQ glue
---
LYRECO Glue stick in plastic barrel with cap.
---
AF Cockroach & Crawling Insect Monitor Pad
---
UV stabilised Glue, date: 2005-12
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special requirements provided product is used correctly.
Store in a clean dry place at temperatures between 5 and 30°C with containers kept closed. Use oldest stock first.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
During processing adequate ventilation is required. The use of local exhaust ventilation is recommended to control fumes.
thermal resistant gloves
face shield
arm protection
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Chemically stable. Prone to slow degradation when heated at application temperatures.
Limited chemical reactivity. No hazardous reactions if stored and handled as prescribed / indicated.
Strong oxidising agents
Include carbon dioxide, carbon monoxide, low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The substance may be toxic to aquatic organisms due to its raw materials. A minor component identified as a Substance of Very High Concern is present but is considered unlikely to leach in significant amounts.
12.2 Persistence and degradability
The raw materials are not expected to biodegrade. One component, 2-(2H-benzotriazol-2-YL)-4-6-ditertpentylphenol, is listed as a potential PBT/vPvB substance under REACH.
12.3 Bioaccumulative potential
Raw materials are generally not expected to bioaccumulate, however, one component (2-(2H-benzotriazol-2-YL)-4-6-ditertpentylphenol) is listed as an SVHC candidate for potential PBT/vPvB properties.
12.4 Mobility in soil
No adsorption is expected based on the knowledge of the raw materials.
12.5 Results of PBT and vPvB assessment
One component, 2-(2H-benzotriazol-2-YL)-4-6-ditertpentylphenol, is listed on the REACH candidate list of Substances of Very High Concern (SVHC) as potentially PBT/vPvB.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents / contaminated container to hazardous or special waste collection point.
Dispose of contents / contaminated container to hazardous or special waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
ALL applicable legislation listed in other parts of this safety data sheet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alcochem glueboards for light traps?
The signal word is warning.
What is the physical form of Alcochem glueboards for light traps?
Alcochem glueboards for light traps is a solid at ambient temperatures, liquid at application temperatures. with amber. color. It has slight resinous. odor.
What is Alcochem glueboards for light traps used for?
Alcochem glue boards for light traps for Industrial uses: Uses of substances as such or in preparations at industrial sites. Formulation (mixing) of preparations and/or re-packaging (excluding alloys).
What are the hazard statements for Alcochem glueboards for light traps?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of Alcochem glueboards for light traps?
The melting point is 68 to 78°C. and the boiling point is No applicable information available. Based on composition expected to be >250°C..