Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Adhesive mixture for producing glueboards for U.V. lamps.
- Product Code
- all the codes from P-B06XXXXXX to P-N06XXXXX, and personalized codes.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
adhesive mixture for the production of glue traps for flies and flying insects.
Uses advised against
all those not mentioned in the identified uses.
Manufacturers & Suppliers
GEA s.r.l.
manufacturer
Via Fermi, 10 – 20019 Settimo Milanese (MI)
+39 02 33514890
Emergency Contacts
National Poisons Information Service-NHS 111 Service
111
available 24h/day, 365 days/year
Gea emergency phone number
+39.(0)2.33514890
available from 9.00 a.m. to 6.00 p.m., from Monday, to Friday, for technical assistance only
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
adhesive mixture.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Reaction mass of Bis (1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate. | --- | 0.1 - 1% | Yes |
| 2-(2H-Benzotriazol-2-yl)-4,6-diteripentyIphenol EC: 247-384-8 | 25973-55-1 | 0.1 - 1% | Yes |
Declaration of the ingredients complying with the CLP (CE) n1272/2008. For full text of the H statements (Hazardous statements) see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult a doctor if complaint persists.
wash with soap or liquid paraffin.
Symptoms: Rash, Urticaria
wash with plenty of running water.
consult a doctor.
Immediate Medical Attention
See section: Description of first aid measures.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, fire extinguishing powders, carbon dioxide. For the not-burst product losses and discharges, water spray can be used to waste inflammable vapours and protect all the people working to stop the loss.
water jets must not be used. Water is not effective to extinguish fire, but it can be used to cool the closed drums which are exposed to fire.
toxic gases can be released in case of fire.
Water is not effective to extinguish fire, but it can be used to cool the closed drums which are exposed to fire. This is necessary to prevent explosions.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Avoid contact with skin and eyes. Keep unprotected people away.
Do not release into the environment. Do not empty into drains, surface water, ground water.
Remove mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working.
no special measures are required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
ensure a good ventilation/suction.
Wear refractive gloves category III (ref. Reg. EN374). For the gloves material it's necessary to consider: compatibility, degradation, time-to-break and permeation. In case of mixture, the gloves durability to chemical agents must be checked before their use since it is not predictable. The gloves consumption depends on their use durability and way.
Goggles which can be tightly sealed. (ref. Reg. EN 166).
In case of dust formation, we recommend wearing of appropriate respiratory protection equipment with particle filter P. This recommendation should be matched to local conditions.
Wear protective equipment with long sleeves and safety shoes for professional use of I category (ref. Reg. 89/686/CEE and EN ISO 20344). Rinse with water and soap after have removed the protective clothes.
The emissions coming from manufacturing processes, included those from ventilation devices, should be checked in order to comply with the regulations on environmental protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and use conditions.
Stable under recommended storage and use conditions.
None under use and storage conditions.
None. Nevertheless, comply with the usual cautions towards chemical products.
None if used properly.
No decomposition if used according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In consultation with the responsible local authority, it must be subjected to special treatment.
In consultation with the responsible local authority, it must be subjected to special treatment.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Adhesive mixture for producing glueboards for U.V. lamps.?
The signal word is warning.
What is the physical form of Adhesive mixture for producing glueboards for U.V. lamps.?
Adhesive mixture for producing glueboards for U.V. lamps. is a solid material appearing as solid material with colourless color. It has characteristic odor.
What is the solubility of Adhesive mixture for producing glueboards for U.V. lamps.?
no data available.
What is Adhesive mixture for producing glueboards for U.V. lamps. used for?
adhesive mixture for the production of glue traps for flies and flying insects.
What are the hazard statements for Adhesive mixture for producing glueboards for U.V. lamps.?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Adhesive mixture for producing glueboards for U.V. lamps.?
The melting point is no data available. and the boiling point is no data available..