Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DGT® SolventGlue EC.00
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solvent action glue for the gluing of the polymethylmetacrylate (PMMA).
Uses advised against
All uses not indicated in the identified uses.
Manufacturers & Suppliers
DeskGlueTech S.r.l.
manufacturer
Via Edilizia 25/27, 20026 Novate Milanese, Italia
+39 02 89767530
Emergency Contacts
Emergency Contact
+43 14064343
Emergency Contact
+32 070245245
Emergency Contact
+359 29154233
Emergency Contact
1401
Emergency Contact
+45 82121212
Emergency Contact
+34 915620420
Emergency Contact
+385 12348342
Emergency Contact
+372 7943794
Emergency Contact
16662
Emergency Contact
+358 800 147111
Emergency Contact
+33 (0) 145425959
Emergency Contact
112
Emergency Contact
+30 2107793777
Emergency Contact
+353 (01) 8092166
Emergency Contact
+354 5432222
Emergency Contact
112
Emergency Contact
+371 67042473
Emergency Contact
112
Emergency Contact
+370 (85) 2362052
Emergency Contact
+352 80025500
Emergency Contact
2545 0000
Emergency Contact
+47 22591300
Emergency Contact
+31 (0) 887558000
Emergency Contact
112
Emergency Contact
+351 800250250
Emergency Contact
+420 224919293
Emergency Contact
+40 212308000
Emergency Contact
+421 254774166
Emergency Contact
112
Emergency Contact
112
Emergency Contact
+36 80201199
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to open air. If the subject stops breathing, administer artificial respiration. Get medical advice/attention immediately.
Remove contaminated clothing. Rinse skin with a shower immediately. Get medical advice/attention immediately. Wash contaminated clothing before using it again.
Remove contact lenses, if present. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. If problem persists, seek medical advice.
Get medical advice/attention immediately. Do not induce vomiting. Do not administer anything not explicitly authorised by a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder and water spray.
None in particular.
Do not breathe combustion products.
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.
Firefighter Protection
Always wear full fire prevention gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Block the leakage if there is no hazard.
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
Collect the leaked product into a suitable container. Absorb the remainder with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks and naked flames; do not smoke or use matches or lighters. Without adequate ventilation, vapours may accumulate at ground level and, if ignited, catch fire even at a distance, with the danger of backfire. Avoid bunching of electrostatic charges. Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before entering places in which people eat.
Store only in the original container. Store in a cool and well ventilated place, keep far away from sources of heat, naked flames and sparks and other sources of ignition.
Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before entering places in which people eat.
Keep away from heat, sparks and naked flames; do not smoke or use matches or lighters. Without adequate ventilation, vapours may accumulate at ground level and, if ignited, catch fire even at a distance, with the danger of backfire.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that the workplace is well aired through effective local aspiration.
Protect hands with category III work gloves (see standard EN 374). The following should be considered when choosing work glove material: compatibility, degradation, failure time and permeability.
Wear airtight protective goggles (see standard EN 166).
If the threshold value (e.g. TLV-TWA) is exceeded for the substance or one of the substances present in the product, wear a mask with a type AX filter. In the presence of gases or vapours of various kinds and/or gases or vapours containing particulate, combined filters are required.
Wear category II professional long-sleeved overalls and safety footwear (see Regulation 2016/425 and standard EN ISO 20344). Wash body with soap and water after removing protective clothing.
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in normal conditions of use and storage.
There are no particular risks of reaction with other substances in normal conditions of use.
Risk of explosion on contact with: alkaline metals, nitric acid, aluminium powder, ethanediamine, aluminium chloride, perchloric acid, dinitrogen pentoxide, sodium nitride, n-nitroso n-methylurea, potassium hydroxide. May react dangerously with: alkaline earth metals, metal powders, sodium amides, potassium tert-butylate. May form explosive mixtures with: air.
Avoid overheating. Avoid bunching of electrostatic charges. Avoid all sources of ignition. DICHLOROMETHANE: Avoid exposure to: naked flames, overheated surfaces.
alkalis, aluminium, copper and alloys
Decomposes at temperatures above 120°C/248°F. With water and alkalis it may form hydrochloric acid
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The product does not contain any PBT or vPvB substances in concentrations ≥ 0.1%.
12.6. Endocrine disrupting properties
The product does not contain substances listed in the main European lists of potential or suspected endocrine disruptors with environmental effects under evaluation.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Reuse, when possible. Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
Product residues should be considered special hazardous waste. The hazard level of waste containing this product should be evaluated according to applicable regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1593
- Shipping Name
- DICHLOROMETHANE
- Transport Class
- 6.1
- Packing Group
- III
HIN - Kemler: 60; Special provision: 516
EMS: F-A, S-A
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Workers exposed to this chemical agent must not undergo health checks, provided that available risk-assessment data prove that the risks related to the workers' health and safety are modest and that the 98/24/EC directive is respected.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DGT® SolventGlue EC.00?
The signal word is warning.
What is the physical form of DGT® SolventGlue EC.00?
DGT® SolventGlue EC.00 is a liquid appearing as liquid with colourless color. It has characteristic odor.
What is the solubility of DGT® SolventGlue EC.00?
soluble in water
What is DGT® SolventGlue EC.00 used for?
Solvent action glue for the gluing of the polymethylmetacrylate (PMMA).
What are the hazard statements for DGT® SolventGlue EC.00?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
What is the melting point of DGT® SolventGlue EC.00?
The melting point is < 0 ºC and the boiling point is > 40 ºC.