Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
ROCRYL 430 (HPA-LA) commonly used manufacture : manufacture of substance . use at industrial sites : polymer production, industrial (production sites) . polymer production, industrial (downstream user sites) . use in laboratories ..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS06
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H301: Toxic if swallowed.
- H311: Toxic in contact with skin.
- H331: Toxic if inhaled.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
- P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
- P330: Rinse mouth.
- P303+P361: IF ON SKIN (or hair): Take off immediately all contaminated clothing.
- P353: Rinse skin with water.
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P310: Immediately call a POISON CENTER/ doctor.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
- P305+P351: IF IN EYES: Rinse cautiously with water for several minutes.
- P338: Remove contact lenses, if present and easy to do. Continue rinsing.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
DOW EUROPE GMBH
global supplier
BACHTOBELSTRASSE 4 8810 HORGEN SWITZERLAND
CH
31 115 67 2626
DOW BENELUX B.V.
national supplier
HERBERT H.DOWWEG 5 HOEK 4542 NM TERNEUZEN NETHERLANDS
NL
(31) 115 67 2626
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
00 41 447 28 2820
CH
24-Hour
Emergency Contact
00 32 3575 0330
BE
Belgium Poison Center
070/245.245
BE
In case of emergency
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acrylic acid, monoester with propane-1,2-diol EC: 247-118-0 | 25584-83-2 | 97-100% | ⚠️ Hazardous |
| acrylic acid EC: 201-177-9 | 79-10-7 | 0.26% | ⚠️ Hazardous |
| 2-hydroxyethyl acrylate EC: 212-454-9 | 818-61-1 | 0.1% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move person to fresh air and keep comfortable for breathing; consult a physician.
Symptoms:
May cause asthma-like (reactive airways) symptoms.
🖐️ Skin Contact
Immediate continued and thorough washing in flowing water for at least 30 minutes is imperative while removing contaminated clothing. Prompt medical consultation is essential. Wash clothing before reuse. Properly dispose of leather items such as shoes, belts, and watchbands. Suitable emergency safety shower facility should be immediately available.
Symptoms:
Toxic in contact with skin. May cause an allergic skin reaction. Causes severe burns.
👁️ Eye Contact
Wash immediately and continuously with flowing water for at least 30 minutes. Remove contact lenses after the first 5 minutes and continue washing. Obtain prompt medical consultation, preferably from an ophthalmologist. Suitable emergency eye wash facility should be immediately available.
Symptoms:
Causes serious eye damage.
🍽️ Ingestion/Swallowing
Do not induce vomiting. Give one cup (8 ounces or 240 ml) of water or milk if available and transport to a medical facility. Do not give anything by mouth unless the person is fully conscious.
Symptoms:
Toxic if swallowed. Due to irritant properties, swallowing may result in burns and/or ulceration of mouth, stomach and lower gastrointestinal tract with subsequent stricture. Aspiration of vomitus may cause lung injury.
🚨 Immediate Medical Attention Required
Consult a physician; prompt medical consultation is essential; obtain prompt medical consultation, preferably from an ophthalmologist; transport to a medical facility. Chemical eye burns may require extended irrigation. If burn is present, treat as any thermal burn, after decontamination.
Medical Treatment
May cause asthma-like (reactive airways) symptoms. Bronchodilators, expectorants, antitussives and corticosteroids may be of help. Chemical eye burns may require extended irrigation. Due to irritant properties, swallowing may result in burns and/or ulceration of mouth, stomach and lower gastrointestinal tract with subsequent stricture. Aspiration of vomitus may cause lung injury. Suggest endotracheal or esophageal control if lavage is done. If burn is present, treat as any thermal burn, after decontamination. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use engineering controls to maintain airborne level below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, use only with adequate ventilation. Local exhaust ventilation may be necessary for some operations.
🧤 Hand Protection
Use chemical resistant gloves classified under Standard EN374: Protective gloves against chemicals and micro-organisms. Examples of preferred glove barrier materials include: Polyethylene. Ethyl vinyl alcohol laminate ("EVAL"). Polyvinyl alcohol ("PVA"). Styrene/butadiene rubber. Examples of acceptable glove barrier materials include: Butyl rubber. When prolonged or frequently repeated contact may occur, a glove with a protection class of 6 (breakthrough time greater than 480 minutes according to EN 374) is recommended. When only brief contact is expected, a glove with a protection class of 3 or higher (breakthrough time greater than 60 minutes according to EN 374) is recommended. Glove thickness alone is not a good indicator of the level of protection a glove provides against a chemical substance as this level of protection is also highly dependent on the specific composition of the material that the glove is fabricated from. The thickness of the glove must, depending on model and type of material, generally be more than 0.35 mm to offer sufficient protection for prolonged and frequent contact with the substance. As an exception to this general rule it is known that multilayer laminate gloves may offer prolonged protection at thicknesses less than 0.35 mm. Other glove materials with a thickness of less than 0.35 mm may offer sufficient protection when only brief contact is expected. NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glove materials, as well as the instructions/specifications provided by the glove supplier.
👁️ Eye Protection
Use chemical goggles. Chemical goggles should be consistent with EN 166 or equivalent. If exposure causes eye discomfort, use a full-face respirator (meeting standard EN 136) with organic vapor cartridge (meeting standard EN 14387).
😷 Respiratory Protection
Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, use an approved respirator. Selection of air-purifying or positive-pressure supplied-air will depend on the specific operation and the potential airborne concentration of the material. For emergency conditions, use an approved positive-pressure self-contained breathing apparatus. Use the following CE approved air-purifying respirator: Organic vapor cartridge, type A (boiling point >65 C, meeting standard EN 14387).
🦺 Skin/Body Protection
Use protective clothing chemically resistant to this material. Selection of specific items such as face shield, boots, apron, or full body suit will depend on the task.
🌍 Environmental Exposure Controls
See SECTION 7: Handling and storage and SECTION 13: Disposal considerations for measures to prevent excessive environmental exposure during use and waste disposal.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 2922
📦 Proper Shipping Name
CORROSIVE LIQUID, TOXIC, N.O.S., STABILIZED(Hydroxypropyl acrylate (mix))
⚠️ Transport Hazard Class
8 (6.1)
📋 Packing Group
II
🚢 IMDG Maritime Transport Precautions
No data available.
✈️ IATA Air Transport Precautions
No data available.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for ROCRYL 430 (HPA-LA)?
The signal word for this substance is "danger".
What is the physical form of ROCRYL 430 (HPA-LA)?
ROCRYL 430 (HPA-LA) is a liquid clear with colourless color. It has slight acrylic odor faint unpleasant odor.
What is ROCRYL 430 (HPA-LA) used for?
Manufacture : Manufacture of substance . Use at industrial sites : Polymer production, industrial (production sites) . Polymer production, industrial (downstream user sites) . Use in laboratories .
What are the hazard statements for ROCRYL 430 (HPA-LA)?
This substance has 7 hazard statements: H301: Toxic if swallowed. H311: Toxic in contact with skin. H331: Toxic if inhaled. H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H318: Causes serious eye damage. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of ROCRYL 430 (HPA-LA)?
The melting point is -23,4 C and the boiling point is 198,5 C at 1 013 hPa.