NextSDS Logo
WA

WANNATE HTBL-175S

WARNING liquid (at 20 C, 1013 hPa) SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
WANNATE HTBL-175S

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

UFI Code
S0G0-W0FY-F00N-TT2M

Unique Formula Identifier - for poison centres and emergency response

Uses Information

Identified Uses
Raw material for coating, adhesives, sealants or elastomers in industrial applications
Uses Advised Against
Do not use for private purposes (household).

Overview

WANNATE HTBL-175S commonly used raw material for coating, adhesives, sealants or elastomers in industrial applications.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (WARNING)

Hazard Classifications

Skin Irr. Category 2 H315
Skin Sens. Category 1 H317
STOT RE Category 2 H373
STOT SE Category 3 H336
Flam. Liq. Category 3 H226
Aquatic Chronic Category 2 H411

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H226: Flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H336: May cause drowsiness or dizziness.
  • H373: May cause damage to organs through prolonged or repeated exposure.
  • H411: Toxic to aquatic life with long lasting effects.

Precautionary Statements

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P260: Do not breathe dust/fume/gas/mist/vapours/spray.
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P302+P352: IF ON SKIN: Wash with plenty of water.
  • P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
  • P312: Call a POISON CENTER/doctor if you feel unwell.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Wanhua Chemical (Singapore) Pte.Ltd.

global supplier

๐Ÿ“

50 Raffles Place#33-06, Singapore Land Tower 48623 Singapore

๐ŸŒ

SG

๐Ÿ“ž

+65 62240614; +65 62240615

BorsodChem Zrt.

undefined

๐Ÿ“

H-3700 Kazincbarcika Bolyai tr 1 Hungary

๐ŸŒ

HU

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

SGS Emergency Response Services

๐Ÿ“ž

+32 3 575 55 55

๐ŸŒ

BE

๐Ÿ•’

0-24 h

๐Ÿ—ฃ๏ธ

Languages: EN

Wanhua

๐Ÿ“ž

+86 535 8203123

๐ŸŒ

CN

๐Ÿ—ฃ๏ธ

Languages: ZH, EN

Emergency Contact

๐Ÿ“ž

+86 532 83889090

๐ŸŒ

CN

๐Ÿ—ฃ๏ธ

Languages: ZH, EN

National Poisons Information Service

๐Ÿ“ž

111

๐ŸŒ

GB

๐Ÿ•’

0-24 h

BorsodChem Zrt.

๐Ÿ“ž

+36 48 511 211

๐ŸŒ

HU

๐Ÿ•’

0-24 h

๐Ÿ—ฃ๏ธ

Languages: HU, EN

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Hexamethylene diisocyanate, oligomerisation product, blocked with 2-butanone oxime
EC: 617-779-3
85940-94-9 75% โš ๏ธ Hazardous
Solvent naphtha (petroleum), light arom.
EC: 265-199-0
64742-95-6 25% โš ๏ธ Hazardous
Hexamethylene diisocyanate
EC: 212-485-8
822-06-0 0.1% โš ๏ธ Hazardous

Composition Notes

Full text of H-phrases: see section 16.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention immediately.

Symptoms:

shortness of breath, sore throat. The product irritates the respiratory tract.

๐Ÿ–๏ธ Skin Contact

In the event of contact with the skin, preferably wash with a cleanser based on polyethylene glycol or with plenty of warm water and soap. Consult a doctor in the event of a skin reaction. Wash the less clothing before reuse. Clean shoes thoroughly before reuse.

Symptoms:

redness on the skin.

๐Ÿ‘๏ธ Eye Contact

Hold the eyes open and rinse with water for a sufficiently long period of time (at least 10 minutes). Get medical attention immediately.

๐Ÿฝ๏ธ Ingestion/Swallowing

DO NOT induce the patient to vomit, medical advice is required. Never give anything by mouth to an unconscious person. Provided the patient is conscious, wash out mouth with water.

Symptoms:

Headache, nausea.

๐Ÿšจ Immediate Medical Attention Required

Get medical attention immediately for inhalation or eye contact. Medical advice is required for ingestion.

Medical Treatment

Treatment of acute irritation or bronchial constriction is primarily symptomatic.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
liquid (at 20 C, 1013 hPa)
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
colourless to light yellow
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
solvent-like
๐Ÿ“Š Odor Threshold
Not available
๐Ÿงช Ph
No data.
๐ŸงŠ Melting Point
No data.
Critical Property
๐Ÿ’จ Boiling Point
162 C (at 1013 hPa)
Critical Property
๐Ÿ”ฅ Flash Point
ca. 45 C
Critical Property
๐Ÿ“Š Freezing Point
No data.
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not available
๐Ÿ’จ Vapor Pressure
No data.
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
ca. 1.06 g/cm3 (at 25 C)
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
ca. 1.06 g/cm3 (at 25 C)
Critical Property
๐Ÿ”ฅ Flammability
Flammable.
๐Ÿ“Š Upper Explosive Limit
7.5 % (v/v)
๐Ÿ“Š Lower Explosive Limit
1 % (v/v)
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
450 C
๐Ÿ“Š Decomposition Temperature
No data.
๐Ÿ’ง Solubility
Water: Insoluble. Polar and non-polar solvents: No data.
๐Ÿ“Š Partition Coefficient
Not applicable.
๐Ÿ“Š Solubility In Water
Insoluble.
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
2500 - 4500 mPa.s (at 25 C)
๐Ÿ“Š Kinematic Viscosity
No data.
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Provide suitable exhaust ventilation at the processing machines. Use local exhaust ventilation. Enclose the process.

๐Ÿงค Hand Protection

Chemical resistant protective gloves. Examples of gloves materials that might provide suitable protection include: Butyl rubber (BR), Polychloroprene (Neoprene), Nitrile/butadiene rubber (NBR).

๐Ÿ‘๏ธ Eye Protection

Closed safety glasses.

๐Ÿ˜ท Respiratory Protection

Breathing apparatus, full face mask respirator. Respirators type protection can be used in combination with an organic vapour filter type A and where dusts or aerosols could be present with a minimum of A/P2 filter.

๐Ÿฆบ Skin/Body Protection

Safety shoes and closed work clothing.

๐ŸŒ Environmental Exposure Controls

In accordance with local and national regulations.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

1866

๐Ÿ“ฆ Proper Shipping Name

RESIN SOLUTION, flammable

โš ๏ธ Transport Hazard Class

3

๐Ÿ“‹ Packing Group

III

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for WANNATE HTBL-175S?

The signal word for this substance is "warning".

What is the physical form of WANNATE HTBL-175S?

WANNATE HTBL-175S is a liquid (at 20 c, 1013 hpa) with colourless to light yellow color. It has solvent-like odor.

What is the solubility of WANNATE HTBL-175S?

Water: Insoluble. Polar and non-polar solvents: No data.

What is WANNATE HTBL-175S used for?

Raw material for coating, adhesives, sealants or elastomers in industrial applications

What are the hazard statements for WANNATE HTBL-175S?

This substance has 6 hazard statements: H226: Flammable liquid and vapour. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H336: May cause drowsiness or dizziness. H373: May cause damage to organs through prolonged or repeated exposure. H411: Toxic to aquatic life with long lasting effects.

What is the melting point of WANNATE HTBL-175S?

The melting point is No data. and the boiling point is 162 C (at 1013 hPa).