Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECHNYL SHAPE A 402H1 NC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polymer, for industrial processing only
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-0
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation based on: polyamide (PA 66) additives
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and seek medical attention.
Symptoms: Difficulties occur after dust has been inhaled.
Wash thoroughly with soap and water. Burns caused by molten material require hospital treatment.
Symptoms: Burns caused by molten material.
Rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
Symptoms: Irritation may develop.
Rinse mouth and then drink 200-300 ml of water. If difficulties occur: Seek medical attention.
Symptoms: Difficulties may occur.
Immediate Medical Attention
Seek medical attention if difficulties occur.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
TECHNOMELT PUR 4655 ME
---
TECHNOMELT PUR 4655 ME
---
TECHNOMELT AS 294
---
TECHNOMELT PUR PRIMER 6B-23
UFI: SF6K-AWX7-M20Q-K32Y
HiTEC® 402 Performance Additive
UFI: 6KX1-SC6C-R20M-DTXY
HiTEC® 4032 Performance Additive
UFI: PD5R-R4HH-9756-V4AV
TENSARYL HAP804
CAS: 72804
HiTEC® 4140A Performance Additive
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable ventilation is provided to ensure limit values are not achieved.
Use additional heat protection gloves when handling hot molten masses (EN 407), e.g. of textile or leather.
Safety glasses with side-shields (frame goggles) (e.g. EN 166).
Wear respiratory protection if ventilation is inadequate. Breathing protection if breathable aerosols/dust are formed. (Particle filter EN 143 P2 or FFP2).
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TECHNYL SHAPE A 402H1 NC?
The signal word is no signal word.
What is the physical form of TECHNYL SHAPE A 402H1 NC?
TECHNYL SHAPE A 402H1 NC is a solid with various, depending on the colourant color. It has odourless odor.
What is TECHNYL SHAPE A 402H1 NC used for?
Polymer, for industrial processing only
What is the melting point of TECHNYL SHAPE A 402H1 NC?
The melting point is approx. 260 ℃ (1.013 hPa) and the boiling point is The substance / product decomposes therefore not determined..