Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
2-Octanone is a light yellow substance commonly used laboratory chemicals..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapor
- H319: Causes serious eye irritation
- H412: Harmful to aquatic life with long lasting effects
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
- IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower
- P264: Wash face, hands and any exposed skin thoroughly after handling
- P280: Wear eye protection/ face protection
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- If eye irritation persists: Get medical advice/attention
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Fisher Scientific UK
national supplier
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
GB
Thermo Fisher Scientific
regional supplier
Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium
BE
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
001-800-227-6701
US
For information
Emergency Contact
+32 14 57 52 11
BE
For information
Emergency Contact
001-201-796-7100
US
Emergency Number
Emergency Contact
+32 14 57 52 99
BE
Emergency Number
CHEMTREC
001-800-424-9300
US
CHEMTREC
001-703-527-3887
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Octanone EC: 203-837-1 | 111-13-7 | 100% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
🖐️ Skin Contact
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
👁️ Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
🍽️ Ingestion/Swallowing
Clean mouth with water and drink afterwards plenty of water.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use explosion-proof electrical/ventilating/lighting equipment. Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
🧤 Hand Protection
Protective gloves. Glove material: Nitrile rubber, Neoprene, Natural rubber, PVC. Breakthrough time: See manufacturers recommendations. Glove thickness: See manufacturers recommendations. EU standard: EN 374 (minimum requirement). Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g., sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
👁️ Eye Protection
Goggles (European standard - EN 166)
😷 Respiratory Protection
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Organic gases and vapours filter Type A Brown conforming to EN14387. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended half mask: Valve filtering: EN405; or; Half mask: EN140; plus filter, EN 141. When RPE is used a face piece Fit Test should be conducted.
🦺 Skin/Body Protection
Wear appropriate protective gloves and clothing to prevent skin exposure.
🌍 Environmental Exposure Controls
Prevent product from entering drains.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1224
📦 Proper Shipping Name
KETONES, LIQUID, N.O.S.
⚠️ Transport Hazard Class
3
📋 Packing Group
III
🚛 ADR Transport Precautions
No special precautions required.
🚢 IMDG Maritime Transport Precautions
No special precautions required.
✈️ IATA Air Transport Precautions
No special precautions required.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for 2-Octanone?
The signal word for this substance is "warning".
What is the physical form of 2-Octanone?
2-Octanone is a liquid appearing as light yellow with light yellow color. It has organic odor.
What is the solubility of 2-Octanone?
Insoluble (Water Solubility); No information available (Solubility in other solvents)
What is 2-Octanone used for?
Laboratory chemicals.
What are the hazard statements for 2-Octanone?
This substance has 3 hazard statements: H226: Flammable liquid and vapor H319: Causes serious eye irritation H412: Harmful to aquatic life with long lasting effects
What is the melting point of 2-Octanone?
The melting point is -16 C / 3.2 F and the boiling point is 173 C / 343.4 F @ 760 mmHg.