Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1,3-Dinonadecanoin
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Manufacturers & Suppliers
Larodan AB
manufacturer
Karolinska Institutet Science Park, Retzius väg 8, SE-171 65 SOLNA, Sweden
+46 20 15 22 00
http://www.larodan.com
Emergency Contacts
Emergency Contact
112
Emergency Contact
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product is composed of a pure or almost pure substance.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,3-DINONADECANOIN | 372490-74-9 | --- | No |
Notes
Synonyms Glyceryl 1,3-dinonadecanoate. Occurrence of any impurity, stabilising additive, or individual ingredients other than the main ingredient is indicated by the chemical name and the purity level. Explanations to the classification and labelling of the ingredients are given in Section 16e. Official abbreviations are printed in normal font. Text in italics are specifications and/or complement used in the calculation of the hazards of this mixture, see Section 16b
First Aid Measures
Emergency procedures for chemical exposure incidents
Inhalation of fumes from heated product: let the injured rest at a warm place with fresh air. Contact the doctor if symptoms persist.
Normal washing of the skin is considered sufficient; If nevertheless symptoms do occur, contact a physician. Remove contaminated clothes.
As a precaution, rinse the eye thoroughly with water; If symptoms occur, call a doctor/physician.
Flush nose, mouth and throat with water. Upon ingestion of larger amounts, consult a doctor/physician.
Symptoms: Ingestion of large amounts of the product may cause nausea and vomiting.
Immediate Medical Attention
In case of concern, or if symptoms persist, call doctor/physician.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with materials intended for the surrounding fire.
Among common extinguishing agents there are none that are overtly unsuitable.
Produces fumes containing harmful gases (carbon monoxide and carbon dioxide) when burning. The product is not hazardous in the flammable sense.
In case of fire use a respirator mask. Wear full protective clothing. Protective measures should be taken regarding other material at the site of the fire.
Firefighter Protection
In case of fire use a respirator mask. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use recommended safety equipment, see section 8. Note that there is a risk of slipping if product is leaking/spilling.
Small spills can be wiped up with a cloth or similar. Then flush the spill site with water.
Larger spills should first be covered with sand or earth and then be collected.
At amounts considered in this case, the product may be released into the natural environment without serious environmental consequences. Large emissions should however be reported to the emergency services and the Environment Agency.
Small spills can be wiped up with a cloth or similar. Then flush the spill site with water. Larger spills should first be covered with sand or earth and then be collected.
Materials: cloth or similar, sand or earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Read and follow the manufacturer's instructions. Avoid spillage, inhalation and contact with eyes and skin. Keep well closed. The usual precautions for handling chemicals should be observed.
Store in dry and cool area. Store in a ventilated space.
The usual precautions for handling chemicals should be observed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves are normally not needed due to the properties of this product, but may be necessary for other reasons, e.g. mechanical risks, temperature conditions or microbiological risks.
Eye protection is not necessary during normal use.
Protective breathing equipment should only be required in extreme work-situations. Consult the manufacturer if this is the case.
Special measures for protection of the skin are necessary only in rare working situations. In case of doubt, consult occupational expertise. Show this safety data sheet.
For limitation of environmental exposure, see Section 12.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal storage and handling conditions.
The product contains no substances which can lead to hazardous reactions at normal use.
Not indicated
Not indicated
Avoid contact with oxidizers.
Carbon monoxide (CO), carbon dioxide (CO2) and harmful and irritating substances.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to landfill.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not classified as dangerous goods
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1,3-Dinonadecanoin?
The signal word is no signal word.
What is the physical form of 1,3-Dinonadecanoin?
1,3-Dinonadecanoin is a powder appearing as form: powder, colour: white with white color.
What is the solubility of 1,3-Dinonadecanoin?
Solubility in water: Insoluble
What is 1,3-Dinonadecanoin used for?
Laboratory chemicals
What is the melting point of 1,3-Dinonadecanoin?
The melting point is Not applicable and the boiling point is Not applicable.