Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Aliquat 336 is a amber substance commonly used laboratory chemicals..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS06
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H301: Toxic if swallowed
- H314: Causes severe skin burns and eye damage
- H335: May cause respiratory irritation
Precautionary Statements
- Wash face, hands and any exposed skin thoroughly after handling
- Do not eat, drink or smoke when using this product
- Do not breathe dust/fume/gas/mist/vapors/spray
- Wear protective gloves/protective clothing/eye protection/face protection
- Use only outdoors or in a well-ventilated area
- Immediately call a POISON CENTER or doctor/physician
- IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
- IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower
- Wash contaminated clothing before reuse
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- Rinse mouth
- Do NOT induce vomiting
- Store locked up
- Store in a well-ventilated place. Keep container tightly closed
- Dispose of contents/container to an approved waste disposal plant
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Fisher Scientific Company
distributor
One Reagent Lane Fair Lawn, NJ 07410
US
(201) 796-7100
Acros Organics
distributor
One Reagent Lane Fair Lawn, NJ 07410
US
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
ACROS
001-800-ACROS-01
US
For information
Emergency Contact
+32 14 57 52 11
BE
For information
Emergency Contact
001-201-796-7100
US
Emergency Contact
+32 14 57 52 99
BE
CHEMTREC
001-800-424-9300
US
CHEMTREC
001-703-527-3887
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quaternary ammonium compounds, tri-C8-10-alkylmethyl, chlorides | 63393-96-4 | 75% | ✓ Non-hazardous |
| 1-Octanol | 111-87-5 | 2-7% | ✓ Non-hazardous |
| 1-Decanol | 112-30-1 | 3-7% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If not breathing, give artificial respiration. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Remove to fresh air.
🖐️ Skin Contact
Wash off immediately with plenty of water for at least 15 minutes.
👁️ Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
🍽️ Ingestion/Swallowing
Do NOT induce vomiting. Call a physician or poison control center immediately.
Symptoms:
Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation
🚨 Immediate Medical Attention Required
Immediate medical attention is required.
Medical Treatment
Treat symptomatically
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location.
🧤 Hand Protection
Wear appropriate protective gloves
👁️ Eye Protection
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
😷 Respiratory Protection
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
🦺 Skin/Body Protection
Wear appropriate protective clothing to prevent skin exposure.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN2922
📦 Proper Shipping Name
Corrosive liquid, toxic, n.o.s.
⚠️ Transport Hazard Class
8
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Aliquat 336?
The signal word for this substance is "danger".
What is the physical form of Aliquat 336?
Aliquat 336 is a viscous liquid liquid appearing as amber . It has ammonia-like odor.
What is the solubility of Aliquat 336?
Insoluble in water
What is Aliquat 336 used for?
Laboratory chemicals.
What are the hazard statements for Aliquat 336?
This substance has 3 hazard statements: H301: Toxic if swallowed H314: Causes severe skin burns and eye damage H335: May cause respiratory irritation
What is the melting point of Aliquat 336?
The melting point is No data available and the boiling point is No information available.