Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Naphthalene
- Product Code
- 6714
- Chemical Name
- Naphthalene
Regulatory Identifiers
- CAS Number
- 91-20-3 Check regulations →
Identified Uses
Laboratory chemical, Laboratory and analytical use
Uses advised against
Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household). Food, drink and animal feeding-stuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Germany
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
NSW Poisons Information Centre Childrens Hospital
131126
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphthalene | 91-20-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.
Wash with plenty of soap and water. In case of skin irritation, consult a physician.
Symptoms: Mild irritant to skin
Rinse cautiously with water for several minutes. In all cases of doubt, or when symptoms persist, seek medical advice.
Rinse mouth with water (only if the person is conscious). In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible). Call a doctor.
Symptoms: Gastrointestinal complaints, Vomiting
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. type of material NBR (Nitrile rubber) material thickness 0,4 mm breakthrough times of the glove material >480 minutes (permeation: level 6)
Use safety goggle with side protection.
Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P2 (filters at least 94 % of airborne particles, colour code: White).
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1334
- Shipping Name
- NAPHTHALENE, REFINED
- Transport Class
- 4.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Naphthalene?
The signal word is warning.
What is the physical form of Naphthalene?
Naphthalene is a solid with white color. It has characteristic odor.
What is Naphthalene used for?
Laboratory chemical, Laboratory and analytical use
What are the hazard statements for Naphthalene?
This substance has 3 hazard statements:
- H228: Flammable solid
- H302: Harmful if swallowed
- H351: Suspected of causing cancer
What is the melting point of Naphthalene?
The melting point is 80.3 C at 1,013 hPa (ECHA) and the boiling point is 218.1 C at 1,013 hPa (ECHA).