Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DURAPIPE ECO CLEANER TIN 500ML*12 L39
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent/ Cleaner
Manufacturers & Suppliers
Bison International
manufacturer
Dr.A.F.Philipsstraat 9, NL-4462 EW Goes, PO Box 160, NL-4460 AD Goes
Vinidex
distributor
4-26 College St, Darlinghurst, NSW 2010
02 8278 0500
http://www.vinidex.com.au
Emergency Contacts
Poisons Information Centre
131126
Emergency Contact
+31 88 3235700
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
DURAPIPE AIRLINE EXTRA BOT 500ML*12 L202
---
MOTIP AIRCO CLEANER 500 ML
---
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
MOTIP® INDUSTRIAL CLEANER 500 ML
---
Soft Surface Cleaner 500ml 34405
---
MOTIP CONTACT CLEANER 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Solvent resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber, BR. Recommended thickness of the material: > 0,7 mm. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. For the mixture of chemicals mentioned below the penetration time has to be at least 120 minutes (Permeation according to EN 374 Part 3: Level 4).
Tightly sealed goggles
Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Filter AX, Filter A.
Solvent resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S., SPECIAL PROVISION 640D (ACETONE, ETHYL METHYL KETONE (METHYL ETHYL KETONE))
- Transport Class
- 3 Flammable liquids.
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DURAPIPE ECO CLEANER TIN 500ML*12 L39?
The signal word is danger.
What is the physical form of DURAPIPE ECO CLEANER TIN 500ML*12 L39?
DURAPIPE ECO CLEANER TIN 500ML*12 L39 is a fluid with according to product specification color. It has characteristic odor.
What is DURAPIPE ECO CLEANER TIN 500ML*12 L39 used for?
Cleaning agent/ Cleaner
What are the hazard statements for DURAPIPE ECO CLEANER TIN 500ML*12 L39?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of DURAPIPE ECO CLEANER TIN 500ML*12 L39?
The melting point is Undetermined. and the boiling point is 55 C.