NextSDS Logo
Safety Data Sheet EN

Neozyme Enzymatic Foam Spray

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Neozyme Enzymatic Foam Spray
Product Form
Liquid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

A liquid concentrate detergent for use in automatic spray and ultrasonic washer Liquid in a trigger format to keep soiling on used surgical instruments moist prior to the start of the decontamination process.

Manufacturers & Suppliers

E

Ebiox Ltd

national supplier

822 Fountain Court, Birchwood Boulevard, Birchwood, Warrington, WA3 7QZ, UK

+44 (0)1925 202205

E

Ebiox Ltd

manufacturer

822 Fountain Court, Birchwood Boulevard, Birchwood, Warrington, WA3 7QZ, UK

Emergency Contacts

UK National Poisons Information Service

0870 600 6266

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

An aqueous solution of a proprietary blend of anionic surfactant, foam booster, preservative which is listed in Annex II of Regulation (EC) 1451/2007 for Product Type 6 and protease enzyme preparation..

Chemical Name CAS Number Concentration Hazardous
SUBTILISIN EC: 232-752-2 9014-01-1 0.5% Yes
ALCOHOLS C12-14, ETHOXYLATED,SULFATES, SODIUM SALTS EC: 500-234-8 68891-38-3 0.3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air. If necessary, seek medical advice.

Skin contact

Clean areas of skin affected with soap and plenty of water. Seek medical advice.

Eye contact

Wash out eye thoroughly with plenty of water until irritation subsides; consult an eye specialist/ophthalmologist.

Ingestion

If product is swallowed, do NOT induce vomiting. Drink plenty of water; if necessary, seek medical advice.

Immediate Medical Attention

Seek medical advice.

Medical Treatment

Treatment as described above. Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

To suit local surroundings (e.g. water spray, carbon dioxide, foam or chemical powder).

Unsuitable media

Do not use water jet.

Specific hazards

Decomposition products released in a fire should be considered as probably harmful if inhaled.

Firefighter Protection

Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow to get into waste water or waterways; if this occurs, inform the relevant water authority at once.

Cleanup methods

Take up with absorbent material, e.g. sand, sawdust into tightly closable containers.

Materials: absorbent material, e.g. sand, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special measures required but avoid inhalation of the sprayed preparation, direct contact of the preparation with the eyes and prolonged contact with the skin

Storage

Ensure adequate ventilation of the storage area. Keep containers tightly closed, cool and dry.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation (e.g. local exhaust ventilation).

Hands

Suitable gloves may be required after considering your own risk assessment; e.g. tasks undertaken)

Eyes

Safety goggles if splashing is possible.

Respiratory

Not applicable

Skin/Body

Protective overall

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colourless
Colour Intensity
---
Form
---
Odor
Odourless
Odor Threshold
Not determined
Ph
Approx. 8
Melting Point
Not determined
Boiling Point
100°C
Flash Point
>100
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
Not determined
Vapor Density
Not determined
Relative Density
Not determined
Bulk Density
---
Density
---
Flammability
Not flammable
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
Not applicable
Solubility
---
Partition Coefficient
Not determined
Solubility In Water
Completely miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined
Kinematic Viscosity
Not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Stable under normal conditions of handling

Hazardous reactions

None known

Avoid

None known

Incompatible

None known

Decomposition

None known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

In accordance with national and local authority regulations, e.g. The Hazardous Waste (England & Wales) Regulations 2005.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not classified
Shipping Name
Not classified
Transport Class
Not classified
Packing Group
Not classified
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The product is classified in according with Regulation (EC) No 1272/2008 and Regulation (EC) No 1907/2006, on the basis of available information for the ingredients from supplier safety data sheets

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Neozyme Enzymatic Foam Spray?

The signal word is no signal word.

What is the physical form of Neozyme Enzymatic Foam Spray?

Neozyme Enzymatic Foam Spray is a liquid with colourless color. It has odourless odor.

What is Neozyme Enzymatic Foam Spray used for?

A liquid concentrate detergent for use in automatic spray and ultrasonic washer Liquid in a trigger format to keep soiling on used surgical instruments moist prior to the start of the decontamination process.

What is the melting point of Neozyme Enzymatic Foam Spray?

The melting point is Not determined and the boiling point is 100°C.