Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Silicone-Spray is a aerosol substance commonly used technical aerosols.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P264: Wash hands thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- IF ON SKIN: Wash with plenty of soap and water.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P312: Call a POISON CENTER or doctor/physician if you feel unwell.
- If skin irritation occurs: Get medical advice/attention.
- P362: Take off contaminated clothing.
- Store in a well-ventilated place. Keep cool.
- P405: Store locked up.
- Protect from sunlight. Do not expose to temperatures exceeding 50C/122F.
- P501: Dispose of contents/container to hazardous or special waste collection point.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
WEICON GmbH & Co. KG
distributor
Knigsberger Str. 255, DE-48157 Mnster
DE
+49(0)251 / 9322 - 0
+49(0)251 / 9322 - 244
WEICON GmbH & Co. KG
manufacturer
Knigsberger Str. 255, DE-48157 Mnster
DE
+49(0)251 / 9322 - 0
+49(0)251 / 9322 - 244
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
EMERGENCY CONTACT - UK, UAE, South Africa
++44 1865 407333
GB
24h
Languages: EN
TRANSPORT EMERGENCY CONTACT - UK, UAE, South Africa
++44 1865 407333
GB
24h
Languages: EN
GIFTNOTRUF/TRANSPORTNOTRUF - Deutschland
++49 69 222 25285
DE
24h
Languages: DE, EN
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Silikonspray auf Lsemittelbasis
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanol EC: 200-578-6 | 64-17-5 | 10-20% | ⚠️ Hazardous |
| propane EC: 200-827-9 | 74-98-6 | 20-30% | ⚠️ Hazardous |
| butane EC: 203-448-7 | 106-97-8 | 20-30% | ⚠️ Hazardous |
| n-hexane EC: 203-777-6 | 110-54-3 | 2% | ⚠️ Hazardous |
| cyclohexane EC: 203-806-2 | 110-82-7 | 2% | ⚠️ Hazardous |
| Naphtha (petroleum) hydrotreated, free of aromatics (note P: < 0,1% benzene), Ethanol EC: 265-151-9 | 64742-49-0 | 20-40% | ⚠️ Hazardous |
| Dimethylpolysiloxan | 36148-62-9 | 5-20% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove the casualty into fresh air and keep him immobile. In the event of symptoms refer for medical treatment.
🖐️ Skin Contact
In case of contact with skin wash off with soap and water. Consult a doctor if skin irritation persists.
👁️ Eye Contact
In case of contact with eyes rinse with plenty of water carefully. In the event of persistent symptoms seek medical treatment.
🍽️ Ingestion/Swallowing
Do not induce vomiting. Refer to medical treatment.
🚨 Immediate Medical Attention Required
No information available.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Care for thoroughly room ventilation, if necessary use in well ventilated area with local exhaust ventilation at workplace.
🧤 Hand Protection
In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves. Chemical protective gloves must be chosen carefully in view of their design and depending on the dependence on the concentration and amounts of dangerous goods used in the specific working tasks. Glove material specification [make/type, thickness, permeation time/life, wetting resistance]: butyl rubber, 0,7mm; 480min
👁️ Eye Protection
tightly fitting goggles
😷 Respiratory Protection
In case of insufficient ventilation or long-term effect use breathing apparatus. Short term: filter apparatus, filter A
🦺 Skin/Body Protection
protective clothing
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1950
📦 Proper Shipping Name
AEROSOLS
⚠️ Transport Hazard Class
2.1
🚛 ADR Transport Precautions
Caution: Gases
🚢 IMDG Maritime Transport Precautions
Caution: Gases
✈️ IATA Air Transport Precautions
Caution: Gases
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Silicone-Spray?
The signal word for this substance is "danger".
What is the physical form of Silicone-Spray?
Silicone-Spray is a aerosol appearing as aerosol with colourless color. It has characteristic odor.
What is the solubility of Silicone-Spray?
not determined
What is Silicone-Spray used for?
Technical Aerosols
What are the hazard statements for Silicone-Spray?
This substance has 5 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H315: Causes skin irritation. H336: May cause drowsiness or dizziness. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Silicone-Spray?
The melting point is not determined and the boiling point is not applicable.