Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL
- Product Code
- 70-2010-1314-4, 70-2010-1686-5
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dental Product, Etchant
Uses advised against
For use only by dental professionals
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If you feel unwell, get medical attention.
Immediately flush with large amounts of water for at least 15 minutes. Remove contaminated clothing. Get immediate medical attention. Wash clothing before reuse.
Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do. Continue rinsing. Immediately get medical attention.
Rinse mouth. Do not induce vomiting. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Material will not burn. Use a fire fighting agent suitable for the surrounding fire.
None inherent in this product.
No special protective actions for fire-fighters are anticipated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
Avoid release to the environment.
Collect as much of the spilled material as possible. Clean up residue with water. Cover, but do not seal for 48 hours.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged or repeated skin contact. Do not breathe dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Wash contaminated clothing before reuse. Do not get in eyes. Keep away from reactive metals (eg. Aluminum, zinc etc.) to avoid the formation of hydrogen gas that could create an explosion hazard.
Keep only in original container. Store in a corrosive resistant container with a resistant inner liner. Store away from strong bases.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a well-ventilated area.
See Section 7.1 for additional information on skin protection.
Safety Glasses with side shields
None required.
See Section 7.1 for additional information on skin protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
Hazardous polymerization will not occur.
None known.
Strong bases
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility.
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contact 3M for more information.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL?
The signal word is danger.
What is the physical form of 7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL?
7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL is a liquid appearing as slight characteristic odor, blue with blue color. It has slight characteristic odor odor.
What is the solubility of 7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL?
No Data Available
What is 7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL used for?
Dental Product, Etchant
What are the hazard statements for 7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of 7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL?
The melting point is Not Applicable and the boiling point is Not Applicable.