NextSDS Logo
Safety Data Sheet EN

MOLYKOTE(R) CU-7439 PLUS

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOLYKOTE(R) CU-7439 PLUS
Product Code
000000000002166224

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricants and lubricant additives

Manufacturers & Suppliers

D

Dow Corning Corporation

manufacturer

South Saginaw Road, Midland Michigan 48686

(989) 496-6000

Emergency Contacts

24 Hour Emergency Telephone

(989) 496-5900

24h

CHEMTREC

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture

Inorganic and organic compounds in mineral oil

Chemical Name CAS Number Concentration Hazardous
Residual oils (petroleum), solvent-dewaxed 64742-62-7 70 - 90% Yes
Copper metal powder 7440-50-8 10 - 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. Get medical attention if symptoms occur.

Symptoms: None known.

Skin contact

Wash with water and soap as a precaution. Get medical attention if symptoms occur.

Symptoms: None known.

Eye contact

Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.

Symptoms: None known.

Ingestion

If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.

Symptoms: None known.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations. Dust formation may be relevant in the processing of this product. In addition to substance-specific OELs, general limitations of concentrations of particulates in the air at workplaces have to be considered in workplace risk assessment. Relevant limits include: OSHA PEL for Particulates Not Otherwise Regulated of 15 mg/m3 - total dust, 5 mg/m3 - respirable fraction; and ACGIH TWA for Particles (insoluble or poorly soluble) Not Otherwise Specified of 3 mg/m3 - respirable particles, 10 mg/m3 - inhalable particles.

Hands

Wash hands before breaks and at the end of workday.

Eyes

Wear the following personal protective equipment: Safety glasses

Respiratory

General and local exhaust ventilation is recommended to maintain vapor exposures below recommended limits. Where concentrations are above recommended limits or are unknown, appropriate respiratory protection should be worn. Follow OSHA respirator regulations (29 CFR 1910.134) and use NIOSH/MSHA approved respirators. Protection provided by air purifying respirators against exposure to any hazardous chemical is limited. Use a positive pressure air supplied respirator if there is any potential for uncontrolled release, exposure levels are unknown, or any other circumstance where air purifying respirators may not provide adequate protection.

Skin/Body

Skin should be washed after contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Ph
Not applicable
Melting Point
No data available
Relative Evaporation Rate
---
Odor Threshold
No data available
Metal Corrosion
---
Voc Content
---
Flash Point
> 200 C
Colour Intensity
---
Solubility
---
Cloud Point
---
Density
---
Auto Ignition Temperature
No data available
State Under Standard Conditions
---
Appearance
paste
Lower Explosive Limit
No data available
Partition Coefficient
No data available
Flammability
Not classified as a flammability hazard
Colour
bronze
Properties Status
---
Vapor Pressure
Not applicable
Freezing Point
No data available
Dynamic Viscosity
Not applicable
Softening Point
---
Solidification Point
---
Crystallisation Point
---
Decomposition Temperature
No data available
Vapor Density
---
Solubility In Fat
---
Boiling Point
Not applicable
Explosive Limits
---
Form
---
Kinematic Viscosity
---
Evaporation Rate
Not applicable
Upper Explosive Limit
No data available
Physical State
---
Physical State Data
---
Bulk Density
---
Odor
slight
Molecular Weight
No data available
Solubility In Water
No data available
Relative Density
0.99
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOLYKOTE(R) CU-7439 PLUS?

The signal word is no signal word.

What is MOLYKOTE(R) CU-7439 PLUS used for?

Lubricants and lubricant additives

What is the melting point of MOLYKOTE(R) CU-7439 PLUS?

The melting point is No data available and the boiling point is Not applicable.