Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- neodisher CM L
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC35 Washing and cleaning products (including solvent based products)
Manufacturers & Suppliers
Chemische Fabrik Dr. Weigert GmbH & Co. KG
manufacturer
Mhlenhagen 85 D-20539 Hamburg
+49 40 789 60 0
www.drweigert.com
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. When spray fog inhaled, seek medical aid.
After contact with skin, wash immediately with plenty of water. Take medical treatment.
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Summon a doctor immediately.
If swallowed, seek medical advice immediately and show this container or label. Rinse mouth thoroughly with water. Let plenty of water be drunk in small gulps. Do not induce vomiting.
Immediate Medical Attention
Summon a doctor immediately (for eye contact). If swallowed, seek medical advice immediately and show this container or label. In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant gloves Use Permanent hand contact Appropriate Material neoprene Material thickness >= 0,65 mm Breakthrough time - 480 min Appropriate Material nitrile Material thickness >= 0,4 mm Breakthrough time - 480 min Appropriate Material butyl Material thickness >= 0,7 mm Breakthrough time - 480 min Use Short-term hand contact Appropriate Material nitrile Material thickness >= 0,11 mm Hand protection must comply with EN 374.
Safety glasses with side protection shield; Eye protection must comply with EN 166.
If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn. Short term: filter apparatus, combination filter B-P3
Clothing as usual in the chemical industry. Protective shoes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1719
- Shipping Name
- CAUSTIC ALKALI LIQUID, N.O.S.
- Transport Class
- 8
- Packing Group
- II
See Sections 6 to 8
See Sections 6 to 8
See Sections 6 to 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for neodisher CM L?
The signal word is danger.
What is the physical form of neodisher CM L?
neodisher CM L is a liquid with light yellow color. It has characteristic odor.
What is the solubility of neodisher CM L?
not determined
What is neodisher CM L used for?
PC35 Washing and cleaning products (including solvent based products)
What are the hazard statements for neodisher CM L?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of neodisher CM L?
The melting point is not determined and the boiling point is appr. 100 C.