Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EOSIN-RAL 555
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostic medical device.
Uses advised against
For professional use only.
Manufacturers & Suppliers
RAL DIAGNOSTICS S.A.S.
manufacturer
Site Montesquieu, 33651 MARTILLAC CEDEX France
+33 (0) 5 57 96 04 04
http://www.ral-diagnostics.com
Emergency Contacts
ORFILA
+33 (0) 1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product is considered to be hazardous and contains hazardous components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Eosin Y EC: 241-409-6 | 17372-87-1 | 0.1% | Yes |
| A mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one [EC No 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC No 220-239-6] (3:1) | 55965-84-9 | 0.005% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take victim to fresh air. Obtain medical attention if breathing difficulty persists.
Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.
Flush with plenty of water. Seek medical attention if ill effect or irritation develops.
Symptoms: May cause sensitization by skin contact.
Rinse immediately with plenty of water. Seek medical attention if irritation develops.
Symptoms: Not expected to present a significant eye contact hazard under anticipated conditions of normal use.
Rinse mouth. Seek medical attention if ill effect develops.
Symptoms: No significant signs or symptoms indicative of any adverse health hazard are expected to occur as a result of ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Powder. Carbon dioxide. Use extinguishing media appropriate for surrounding fire.
Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Equip cleanup crew with proper protection. Wear suitable respiratory equipment.
Prevent entry to sewers and public waters.
Clean up any spills as soon as possible, using an absorbent material to collect it.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
SPECTRA Eosin
---
Erythrosine B (C.I. 45430) for microscopy Certistain®
CAS: 16423-68-0
Erythrosin B, spirit soluble
CAS: 15905-32-5
Erythrosin yellowish
CAS: 33239-19-9
CD45RA FITC CE
---
EVERFOS 1350
CAS: 68937-41-7
R-301E R-569M RADIANT RED
UFI: T050-G0K0-T00J-666H
Carbolic fuchsin RAL
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with appropriate industrial hygiene and safety procedures. Keep away from food, drink and animal feeding stuffs. Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work.
Keep bottles closed when not in use.
Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation in process area to prevent formation of vapour.
Gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. In full: Material: nitrile rubber. Minimum thickness: 0.10 mm. Break through time: Not tested. Proposed equipment : Touch N Tuff® (Ansell 92-500 ou 92-670). In the event of splashes: Material: nitrile rubber. Minimum thickness: 0.10 mm. Break through time: Not tested. Proposed equipment : Touch N Tuff® (Ansell 92-500 ou 92-670). Source of data: Ansell Healthcare Europe N.V., Riverside Business Park, Block J, Boulevard International 55, B-1070 Brussels, Belgium, Tel. +32 (0)2 528 74 00, e-mail : info@ansell.eu.
Safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Not required.
Wear suitable protective clothing. Choose body protection in relation to the dangerousness of the product, its concentration and the amounts used depending on the workstation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in normal temperature and pressure conditions.
No data available.
No data available.
No data available.
No data available.
No data available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Unregulated
- Shipping Name
- Unregulated
- Transport Class
- Unregulated
- Packing Group
- Unregulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Ensure all national/local regulations are observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EOSIN-RAL 555?
The signal word is warning.
What is the physical form of EOSIN-RAL 555?
EOSIN-RAL 555 is a liquid. with orangey red. color. It has odourless. odor.
What is the solubility of EOSIN-RAL 555?
No data available.
What is EOSIN-RAL 555 used for?
In vitro diagnostic medical device.
What are the hazard statements for EOSIN-RAL 555?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of EOSIN-RAL 555?
The melting point is No data available. and the boiling point is No data available..