Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V
- Product Code
- 42-0026-1608-6, 43-7800-1785-1, 43-7800-2117-6, 43-7800-2387-5, 70-2007-6355-8, 70-2007-6356-6, 70-2011-8903-5, 7000128725, 7000053954
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
To indicate attainment or conditions for sterilization.
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000, USA
1-888-364-3577
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Plastic Tube | 111211-39-3 | 50 - 60% | No |
| Polypropylene Cap | 9003-07-0 | 20 - 25% | No |
| Growth media solution | --- | 10 - 15% | No |
| Borosilicate Glass ampule | --- | 5 - 10% | No |
| Process Aid | 17833-43-1 | 5% | No |
| Label | 65996-61-4 | 2% | No |
| Nylon Nonwoven | --- | 2% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
No need for first aid is anticipated.
No need for first aid is anticipated.
No need for first aid is anticipated.
No need for first aid is anticipated.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Material will not burn. Use a fire fighting agent suitable for the surrounding fire.
None inherent in this product.
No special protective actions for fire-fighters are anticipated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Observe precautions from other sections.
Avoid release to the environment.
Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Seal the container.
Materials: appropriate solvent
Related Products
Similar products with comparable safety profiles
3M™ Attest™ 1292E Rapid Readout Biological Indicator
---
3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S
---
3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R
---
AMH Elecsys cobas e 100
---
eBio Fixable Viability Dye
---
Rapid fFN Level 1 / Negative Control, Rapid fFN Level 2 / Positive Control
---
MicroVue C1-Inhibitor Plus EIA kit
---
High Sensitivity RNA ScreenTape
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin contact with hot material. Avoid release to the environment.
No special storage requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not applicable.
No protective gloves required.
None required.
None required.
No protective gloves required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material is considered to be non reactive under normal use conditions.
Hazardous polymerization will not occur.
None known.
None known.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility.
Dispose of contents/ container in accordance with the local/regional/national/international regulations. Prior to disposal, consult all applicable authorities and regulations to insure proper classification.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V?
The signal word is no signal word.
What is the physical form of 3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V?
3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V is a liquid appearing as liquid with multicolor color. It has nearly odorless odor.
What is 3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V used for?
To indicate attainment or conditions for sterilization.
What is the melting point of 3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V?
The melting point is Not Applicable and the boiling point is 100 °C [Details:applies to media].