NextSDS Logo
Safety Data Sheet EN

SOPPEC - FLUO MARKER

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SOPPEC - FLUO MARKER
Product Code
1313 ---.

Regulatory Identifiers

CAS Number
N/A
UFI Code
2RXM-DY7M-1102-DNRS

Identified Uses

Forestry marking paint in aerosol dispensers for profesional use

Manufacturers & Suppliers

T

TECHNIMA France.

national supplier

ZI - 5, rue Ampre. 16440.NERSAC.FRANCE.

+33545909312

Emergency Contacts

INRS / ORFILA

+33 (0)1 45 42 59 59

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

Precautionary Statements

P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 /122 F.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
butaan (met 0,1 % butadieen (203-450-8)) EC: 203-448-7 106-97-8 10 - 25% Yes
propaan vloeibar gemaakt EC: 200-827-9 74-98-6 10 - 25% Yes
HYDROCARBONS, C10-C13, N-ALKANES, ISOALKANES, CYCLICS, <2% AROMATICS EC: 918-481-9 --- 10 - 25% Yes
HYDROCARBONS, C9-C10, N-ALKANES, ISOALKANES, CYCLICS, < 2% AROMATICS EC: 927-241-2 --- 10 - 25% Yes
ISOBUTANE (CONTENANT MOINS DE 0.1% DE BUTADIENE) EC: 200-857-2 75-28-5 10 - 25% Yes
1-Methoxy-2-propylacetate EC: 203-603-9 108-65-6 2.5 - 10% Yes
ethyl acetate EC: 205-500-4 141-78-6 2.5 - 10% Yes

Notes

(Full text of H-phrases: see section 16) [1] Substance for which maximum workplace exposure limits are available. [7] Propellant gas Note P: The carcinogen or mutagen classification does not apply because the substance contains less than 0.1 % w/w of benzene (EINECS 200-753-7).

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Eye contact

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

Ingestion

In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor. Keep the person exposed at rest. Do not force vomiting. Seek medical attention, showing the label. If swallowed accidentally, call a doctor to ascertain whether observation and hospital care will be necessary. Show the label.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure that there is adequate ventilation, especially in confined areas.

Hands

Wear suitable protective gloves in the event of prolonged or repeated skin contact. Type of gloves recommended : - Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)) - PVA (Polyvinyl alcohol)

Eyes

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes Before handling, wear safety goggles in accordance with standard EN166.

Skin/Body

Suitable type of protective clothing : In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605/A1 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034/A1 to prevent skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
Not specified.
Physical State
Fluid liquid.
Decomposition Temperature
Not specified.
Softening Point
---
Ph
Not relevant.
Lower Explosive Limit
Not stated.
Properties Status
---
Freezing Point
Not stated.
Molecular Weight
---
Colour Intensity
---
Kinematic Viscosity
Not stated.
Bulk Density
---
Density
< 1
Flash Point
Not relevant.
Odor
---
Vapor Pressure
Not relevant.
Form
---
Odor Threshold
Not stated.
Boiling Point
Not specified.
Evaporation Rate
---
Partition Coefficient
Not stated.
Vapor Density
---
Voc Content
---
Dynamic Viscosity
---
Relative Evaporation Rate
---
Appearance
---
Crystallisation Point
---
Relative Density
---
Solidification Point
---
Colour
Various
Cloud Point
---
Solubility In Fat
Not stated.
Physical State Data
liquid
Solubility In Water
Insoluble.
Solubility
---
Upper Explosive Limit
Not stated.
Auto Ignition Temperature
Not specified.
Explosive Limits
---
State Under Standard Conditions
---
Metal Corrosion
---
Flammability
Not stated.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS, flammable
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SOPPEC - FLUO MARKER?

The signal word is danger.

What is the physical form of SOPPEC - FLUO MARKER?

SOPPEC - FLUO MARKER is a fluid liquid. with various color.

What is SOPPEC - FLUO MARKER used for?

Forestry marking paint in aerosol dispensers for profesional use

What are the hazard statements for SOPPEC - FLUO MARKER?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

What is the melting point of SOPPEC - FLUO MARKER?

The melting point is Not specified. and the boiling point is Not specified..

Compliance Scanner

Scan your compliance