Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SILKOSPRAY
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Health services Industrial uses Production of plastics.
Manufacturers & Suppliers
Willy Rsch GmbH
Willy-Rsch-Strae 4-10 D-71394 Kernen
+49-7151-406-0
Emergency Contacts
SWR
0700 24112112 (SWR)
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of troubles or persistent symptoms consult doctor.
Wash with plenty of water.
Rinse immediately carefully and thoroughly with eye-bath or water. In case of troubles or persistent symptoms, consult an ophthalmologist.
Rinse mouth immediately and drink plenty of water. Seek medical advice immediately.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. If handled uncovered, arrangements with local exhaust ventilation should be used if possible. Do not breathe gas/fumes/vapour/spray.
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Protective gloves have to be replaced at the first sign of deterioration. Protect skin by using skin protective cream.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection. Filter type: AX (colour: brown)
Body protection: not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1950
- Shipping Name
- AEROSOLS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SILKOSPRAY?
The signal word is danger.
What is the physical form of SILKOSPRAY?
SILKOSPRAY is a aerosol with colourless color. It has characteristic odor.
What is the solubility of SILKOSPRAY?
not determined
What is SILKOSPRAY used for?
Health services Industrial uses Production of plastics.
What are the hazard statements for SILKOSPRAY?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of SILKOSPRAY?
The melting point is < 0 C and the boiling point is -44 C.