Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- tesa 60020 60021 Spray Glue PERMANENT
- Product Code
- tesa 60020 (300ml) + 60021 (500ml)
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
tesa SE
manufacturer
Hugo-Kirchberg-Strasse 1, D-22848 Norderstedt, Germany
+49-40-88899-101
Emergency Contacts
tesa SE
+49-40-88899-0
tesa SE
+49-40-88899-9111
UK National Poisons Emergency number
0870 600 6266
Guy's & St Thomas' Poisons Unit
+44 (0)20 7188 0100
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Dispersion of natural rubber and resins in the following substances:
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated light EC: 265-151-9 | 64742-49-0 | 50% | Yes |
| cyclohexane | 110-82-7 | 25% | Yes |
| propane liquefied EC: 200-827-9 | 74-98-6 | 25% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 25% | Yes |
| butane, pure EC: 203-448-7 | 106-97-8 | 10% | Yes |
For the wording of the listed risk phrases refer to section 16.
Notes
SVHC Free of any SVHC substances or < 0.1 %; Regulation (EC) No 648/2004 on detergents / Labelling for contents not applicable
First Aid Measures
Emergency procedures for chemical exposure incidents
Instantly wash with water and soap and rinse thoroughly.
Rinse opened eyes for several minutes under running water.
If swallowed, gastric irrigation with added, activated carbon.
Immediate Medical Attention
In case of persistent symptoms consult physician.
Medical Treatment
If swallowed, gastric irrigation with added, activated carbon.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder.
Water with a full water jet.
Can be released in case of fire: Nitrogen oxide (NOx), Carbon monoxide (CO)
Cool endangered containers with water spray jet.
Firefighter Protection
Put on breathing apparatus. Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Prevent product from reaching sewage system or water bodies.
Do not flush with water or aqueous cleansing agents
Related Products
Similar products with comparable safety profiles
tesa Adhesive Remover Spray
---
DGT® SolventGlue EC.00
---
Loctite Spray Adhesive Multi Purpose
---
DGT® SolventGlue EC.7
---
ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE
CAS: Not Applicable (mixture)
DGT SolventGlue® HYBRID LS-ST
UFI: 8G20-N02D-Y009-UWCG
SAS470 SPRAY ADHESIVE 500ML
---
TECTANE SILICONE SPRAY
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace. Open and handle container with care.
Store in cool location. Observe official regulations on storing packagings with pressurised containers. Keep container tightly sealed. Do not seal container gastight. Store in cool, dry conditions in well sealed containers. Protect from heat and direct sunlight. Store only outside or in explosion proof rooms.
Do not spray on flames or red-hot objects. Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Solvent resistant gloves. Material of gloves: Nitrile rubber, NBR. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Not required.
Use breathing filter A2. In case of short term exposure use respiratory protection. In case of intensive or longer exposure use respiratory protection equipment independent from ambient air. Use respiratory protection in case of insufficient ventilation.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reactions known
No further relevant information available. Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Must be specially treated under adherence to official regulations.
Must be specially treated under adherence to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for tesa 60020 60021 Spray Glue PERMANENT?
The signal word is danger.
What is the physical form of tesa 60020 60021 Spray Glue PERMANENT?
tesa 60020 60021 Spray Glue PERMANENT is a aerosol appearing as aerosol, light yellow with light yellow color. It has solvent-like odor.
What is the solubility of tesa 60020 60021 Spray Glue PERMANENT?
Not miscible or difficult to mix
What are the hazard statements for tesa 60020 60021 Spray Glue PERMANENT?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of tesa 60020 60021 Spray Glue PERMANENT?
The melting point is Not determined and the boiling point is -44 °C (Siedebeginn bzgl. Propan).