Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE is a amber, clear substance commonly used adhesive.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS04
GHS07
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H220: Extremely flammable gas.
- H222: Extremely Flammable Aerosol
- H225: Highly flammable liquid and vapour
- H229: Pressurized container: may burst if heated
- H304: May be fatal if swallowed and enters airways
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H336: May cause drowsiness or dizziness.
- H361: Suspected of damaging fertility or the unborn child .
- H373: May cause damage to the nervous system through prolonged or repeated exposure (Inhalation)
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P101: If medical advice is needed, have product container or label at hand
- P102: Keep out of reach of children
- P103: Read label before use
- P210: Keep away from heat/sparks/open flames/hot surfaces - no smoking
- P211: Do not spray on an open flame or other ignition source
- P251: Pressurized container: Do not pierce or burn, even after use
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray
- P262: Do not get in eyes, on skin, or on clothing
- P264: Wash thoroughly after handling
- P280: Wear protective gloves/eye protection/face protection
- P303+P361+P353: If on skin or hair, remove/takeoff immediately all contaminated clothing. Rinse skin with water/shower.
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50C/122F
- P501: Dispose of contents/container in accordance with local/regional/national/international regulation
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Uline Inc
distributor
12575 Uline Drive Pleasant Prairie, WI 53158
US
1-800-295-5510
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC
1-800-424-9300
US
24 hrs
CHEMTREC
+1-703-527-3887
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-Hexane EC: 203-777-6 | 110-54-3 | 30-60% | ⚠️ Hazardous |
| Hydrocarbon Propellant EC: 270-705-8 | 68476-86-8 | 10-30% | ⚠️ Hazardous |
| Acetone EC: 200-662-2 | 67-64-1 | 10-30% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to fresh air and provide oxygen if breathing is difficult. If not breathing, give artificial respiration, preferably mouth to mouth. Get medical attention immediately.
Symptoms:
slight irritation to the respiratory tract. Excessive exposure may cause central nervous system effects.
🖐️ Skin Contact
Wash with soap and water. Remove contaminated clothing and shoes. Get medical attention immediately. Wash clothing before reuse.
Symptoms:
slight irritation to the skin.
👁️ Eye Contact
If contact with eyes, immediately flush eyes with plenty of water for at least 15 minutes, while holding eyelids open. Get medical attention immediately.
Symptoms:
slight irritation to the eyes.
🍽️ Ingestion/Swallowing
If swallowed, wash out mouth with water provided the person is conscious. Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
🚨 Immediate Medical Attention Required
Get medical attention immediately for inhalation, skin, eye contact, and ingestion exposures.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure adequate ventilation. A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Keep away from sources of ignition. Take precautionary measures against static discharge.
👁️ Eye Protection
Eye & face protection devices such as safety glasses, safety goggles or face shield are recommended.
😷 Respiratory Protection
Use only in an adequately ventilated area. For unknown vapor concentrations use a positive-pressure, pressure-demand, self-contained breathing apparatus (SCBA).
🦺 Skin/Body Protection
Wear the appropriate protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1950
📦 Proper Shipping Name
Aerosols
⚠️ Transport Hazard Class
2.1
📋 Packing Group
Not Applicable
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE?
The signal word for this substance is "danger".
What is the physical form of ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE?
ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE is a gas appearing as amber, clear with amber color. It has hydrocarbon odor odor.
What is the solubility of ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE?
Negligible
What is ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE used for?
Adhesive
What are the hazard statements for ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE?
This substance has 11 hazard statements: H220: Extremely flammable gas. H222: Extremely Flammable Aerosol H225: Highly flammable liquid and vapour H229: Pressurized container: may burst if heated H304: May be fatal if swallowed and enters airways H315: Causes skin irritation H319: Causes serious eye irritation H336: May cause drowsiness or dizziness. H361: Suspected of damaging fertility or the unborn child . H373: May cause damage to the nervous system through prolonged or repeated exposure (Inhalation) H411: Toxic to aquatic life with long lasting effects.
What is the melting point of ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE?
The melting point is N/AV and the boiling point is N/AV.