Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
UNIMOLY C 220 Spray is a aerosol substance commonly used lubricant spray.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS05
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H318: Causes serious eye damage.
- H336: May cause drowsiness or dizziness.
- H373: May cause damage to organs (Central nervous system) through prolonged or repeated exposure if inhaled.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P260: Do not breathe mist.
- P273: Avoid release to the environment.
- P280: Wear eye protection/ face protection.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician.
- Protect from sunlight. Do not expose to temperatures exceeding 50 C/ 122 F.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Klber Lubrication Mnchen
manufacturer
Geisenhausenerstr. 7 81379 Mnchen Deutschland
DE
+49 (0) 89 7876 0
+49 (0) 89 7876 333
Klber Lubrication Deutschland
national supplier
Geisenhausenerstrae 7 81379 Mnchen Deutschland
DE
+49 89 7876 0
+49 89 7876 565
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+49 89 7876 700
DE
24 hrs
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Active agent with propellant and solvent.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| titanium tetrabutanolate EC: 227-006-8 | 5593-70-4 | 5-10% | ⚠️ Hazardous |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 1-3% | ⚠️ Hazardous |
| naphtha (petroleum), hydrodesulphurized heavy EC: 265-185-4 | 64742-82-1 | 1-2.5% | ⚠️ Hazardous |
| solvent naphtha (petroleum), light arom. EC: 265-199-0 | 64742-95-6 | 1-2.5% | ⚠️ Hazardous |
| but-1-ene EC: 203-449-2 | 106-98-9 | 1-10% | ⚠️ Hazardous |
| butene, mixed-1-and-2-isomers EC: 203-452-9 | 107-01-7 | 1-10% | ⚠️ Hazardous |
| propylene EC: 204-062-1 | 115-07-1 | 1-10% | ⚠️ Hazardous |
| zinc oxide EC: 215-222-5 | 1314-13-2 | 0.1-0.25% | ⚠️ Hazardous |
| isobutane EC: 200-857-2 | 75-28-5 | 50-70% | ⚠️ Hazardous |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 10-20% | ⚠️ Hazardous |
| propane EC: 200-827-9 | 74-98-6 | 1-10% | ⚠️ Hazardous |
| butane EC: 203-448-7 | 106-97-8 | 1-10% | ⚠️ Hazardous |
| Graphite EC: 231-955-3 | 7782-42-5 | 1-10% | ✓ Non-hazardous |
Additional Information
For the full text of the R-phrases mentioned in this Section, see Section 16. For the full text of the H-Statements mentioned in this Section, see Section 16.
Composition Notes
The classification as a carcinogen or mutagen need not apply if it can be shown that the substance contains less than 0,1 % w/w benzene.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Call a physician or poison control centre immediately. Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.
Symptoms:
Unconsciousness, Dizziness, Drowsiness, Headache, Nausea, Tiredness
🖐️ Skin Contact
Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse.
👁️ Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Get medical attention immediately.
🍽️ Ingestion/Swallowing
Move the victim to fresh air. If accidentally swallowed obtain immediate medical attention. Keep respiratory tract clear. Do NOT induce vomiting. Rinse mouth with water.
🚨 Immediate Medical Attention Required
Call a physician or poison control centre immediately (inhalation). Get medical attention immediately if irritation develops and persists (skin). Get medical attention immediately (eye contact). Obtain immediate medical attention if accidentally swallowed (ingestion).
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use only in an area equipped with explosion proof exhaust ventilation. Handle only in a place equipped with local exhaust (or other appropriate exhaust).
🧤 Hand Protection
Wear protective gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. In case of contact through splashing: Nitrile rubber, Protective index Class 1
👁️ Eye Protection
Safety glasses with side-shields conforming to EN166
😷 Respiratory Protection
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Short term only. Filter type A-P
🦺 Skin/Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
🌍 Environmental Exposure Controls
Do not allow contact with soil, surface or ground water. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1950
🚛 ADR Transport Precautions
No special precautions required.
🚢 IMDG Maritime Transport Precautions
No special precautions required.
✈️ IATA Air Transport Precautions
No special precautions required.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for UNIMOLY C 220 Spray?
The signal word for this substance is "danger".
What is UNIMOLY C 220 Spray used for?
Lubricant spray
What are the hazard statements for UNIMOLY C 220 Spray?
This substance has 6 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H318: Causes serious eye damage. H336: May cause drowsiness or dizziness. H373: May cause damage to organs (Central nervous system) through prolonged or repeated exposure if inhaled. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of UNIMOLY C 220 Spray?
The melting point is No data available and the boiling point is < -10 C, 1.013 hPa.