Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP ALU-ZINC SPRAY
- Product Code
- 04059
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
MOTIP DUPLI B.V.
manufacturer
Wolframweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether EC: 204-065-8 | 115-10-6 | 25 - 50% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 20 - 25% | Yes |
| Solvent naphtha (petroleum), light arom. EC: 918-668-5 | 64742-95-6 | 12.5 - 20% | Yes |
| zinc powder -zinc dust (stabilized) EC: 231-175-3 | 7440-66-6 | 5 - 10% | Yes |
| aluminium powder (pyrophoric) EC: 231-072-3 | 7429-90-5 | 2.5 - 5% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 2.5 - 5% | Yes |
| Naphtha (petroleum), hydrotreated heavy EC: 265-150-3 | 64742-48-9 | 1 - 2.5% | Yes |
| zinc oxide EC: 215-222-5 | 1314-13-2 | 0.1 - 1% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not required.
Tightly sealed goggles
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS, ENVIRONMENTALLY HAZARDOUS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP ALU-ZINC SPRAY?
The signal word is danger.
What is the physical form of MOTIP ALU-ZINC SPRAY?
MOTIP ALU-ZINC SPRAY is a aerosol with according to product specification color. It has characteristic odor.
What is the solubility of MOTIP ALU-ZINC SPRAY?
Not miscible or difficult to mix.
What is MOTIP ALU-ZINC SPRAY used for?
Paint
What are the hazard statements for MOTIP ALU-ZINC SPRAY?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of MOTIP ALU-ZINC SPRAY?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..