Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EPOFIX HARDENER
- Product Code
- 40200029, 40200031, 40200087
Regulatory Identifiers
- CAS Number
- 90640-67-8 Check regulations →
- EC Number
- 292-588-2 Check regulations →
- REACH No.
- 01-2119487919-13-xxxx
Identified Uses
For embedding and impregnation of materialographic specimens
Uses advised against
No specific uses advised against are identified. (*)
Manufacturers & Suppliers
Struers Ltd
distributor
7275 West Credit Avenue, Ontario L5N 5M9 Mississauga, Canada
Emergency Contacts
Poison & Drug Information Service (PADIS)
1-800-332-1414
Drug and Poison Information Centre (DPIC)
604-682-5050
Drug and Poison Information Centre (DPIC)
1-800-567-8911
Poison Centre
1-800-268-9017
Poison Control Centre
1-800-463-5060
Infotrac
1-800-535-5053
Struers CAN
+1 (905) 8148855
Only during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains: hardener.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amines, polyethylenepoly-, triethylenetetramine fraction EC: 292-588-2 | 90640-67-8 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move injured person into fresh air immediately. Call an ambulance. Bring these instructions.
Symptoms: lung edema (shortness of breath)
Flush immediately with plenty of water and remove contaminated clothing. Call an ambulance, continue to rinse during transportation to hospital and take along these instructions.
Immediately flush with plenty of water. Remove any contact lenses and open eyes wide apart. Call an ambulance and continue flushing during transportation to hospital taking along these instructions.
Immediately call a Poison Center/doctor. Rinse mouth. Do not induce vomiting. Do not drink anything without first consulting a doctor. Have these instructions at hand.
Immediate Medical Attention
Call an ambulance.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
None known.
By heating and fire, very toxic nitrogen oxides may be formed.
Firefighter Protection
Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of vapors and contact with skin and eyes.
Do not discharge into drains, water courses or onto the ground.
Absorb spillage with non-combustible, absorbent material.
Materials: non-combustible, absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of vapors and contact with skin and eyes. Observe good chemical hygiene practices.
Store in a cool and well-ventilated place.
Observe good chemical hygiene practices. Provide easy access to water supply and eye wash facilities.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Mix and prepare in a place with efficient exhaust ventilation. Local exhaust is recommended. An eye wash bottle must be available at the work site. Observe Occupational Exposure Limits and minimize the risk of inhalation.
Use disposable gloves protecting against epoxy along with cotton gloves closest to the skin. Butyl rubber gloves are recommended. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material. (*)
Wear goggles/face shield.
In case of inadequate ventilation and work of brief duration, use suitable respiratory equipment. It is recommended to use respiratory equipment with combination filter, type ABEK
Wear suitable protective clothing as protection against splashing or contamination.
Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
None under normal conditions.
None under normal conditions.
Heating. Direct sunlight.
No information available.
When heated and in case of fire, very toxic nitrogen oxides are formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations. Note that fully cured material is not considered as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2735
- Shipping Name
- AMINES, LIQUID, CORROSIVE, N.O.S. (Amines, polyethylenepoly-, triethylenetetramine fraction)
- Transport Class
- 8
- Packing Group
- II
None known.
None known.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product has been classified in accordance with the hazard criteria of the Hazardous Products Regulations (HPR) and the SDS contains all the information required by the HPR.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EPOFIX HARDENER?
The signal word is danger.
What is the physical form of EPOFIX HARDENER?
EPOFIX HARDENER is a liquid. with yellow color. It has amine. odor.
What is the solubility of EPOFIX HARDENER?
soluble in water
What is EPOFIX HARDENER used for?
For embedding and impregnation of materialographic specimens
What are the hazard statements for EPOFIX HARDENER?
This substance has 3 hazard statements:
- H302 + H312: Harmful if swallowed or in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
What is the melting point of EPOFIX HARDENER?
The melting point is -35°C and the boiling point is 270-300°C.