Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Strongcoat Epoxy Base
- Product Code
- C03/06/03/046 - B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Base part of two component solvent free, nontoxic epoxy protective coating for concrete and metal.
Manufacturers & Suppliers
DCP Saudi Co
manufacturer
P.O. Box 66241, Riyadh 11576, Kingdom of Saudi Arabia
Emergency Contacts
Emergency Contact
+966 11 4612003
available during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700) EC: 500-033-5 | 25068-38-6 | 20 - 30% | Yes |
| oxirane, mono[(C12-14-alkyloxy)methyl] derivs. EC: 271-846-8 | 68609-97-2 | 1 - 10% | Yes |
| Polyamine amide salt | --- | 0.5% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 0.05% | Yes |
| 2-methylpropan-1-ol; iso-butanol EC: 201-148-0 | 78-83-1 | 0.05% | Yes |
| XYLENE. EC: 215-535-7 | 1330-20-7 | 0.5% | Yes |
| Distillates (petroleum), hydrotreated light; Kerosine - unspecified EC: 265-149-8 | 64742-47-8 | 0.1% | Yes |
| Phenol, methylstyrenated EC: 270-966-8 | 68512-30-1 | 0.05% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Seek medical attention if ill effects occur
Symptoms: No specific symptoms known.
Wash skin thoroughly with soap and water. Remove contaminated clothing. Get medical attention if irritation persists. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Symptoms: Irritating to skin. Causes allergic reaction in susceptible people
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Irritating to eyes
Do NOT induce vomiting. Get immediate medical advice/attention.
Immediate Medical Attention
Get immediate medical advice/attention.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with foam, carbon dioxide, dry powder or water spray.
Do not use water jets
Firefighter Protection
Wear self contained breathing apparatus and full protective clothing
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid release to the environment.
Collect spillage.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing dust/fume/gas/mist/vapours/spray. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Wash contaminated clothing before reuse.
Keep away from food, drink and animal feedingstuffs. Store between +5°C and +35°C protect from frost and direct sunlight. Store in original, tightly closed containers
Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves
Wear suitable eye/face protection
Wear suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Considered stable under normal conditions
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid exposure to high temperature or direct sunlight. Avoid freezing.
Incompatible with acids and alkalis. Incompatible with oxidizing substances
Decomposition products may include toxic fumes
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with local, state or national legislation. Dispose of contents/container to an authorised waste collection point.
Dispose of contents/container to an authorised waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID. N.O.S.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This Safety Data Sheet is provided in compliance with the EC Regulations 1907/2006, 1272/2008, 2015/830 and 2020/878
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Strongcoat Epoxy Base?
The signal word is warning.
What is the physical form of Strongcoat Epoxy Base?
Strongcoat Epoxy Base is a liquid with various color. It has characteristic odour odor.
What is Strongcoat Epoxy Base used for?
Base part of two component solvent free, nontoxic epoxy protective coating for concrete and metal.
What are the hazard statements for Strongcoat Epoxy Base?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Strongcoat Epoxy Base?
The melting point is Not available and the boiling point is No data available.