Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 5 Min. Epoxy Hardener
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Curing agent
Uses advised against
No information available.
Manufacturers & Suppliers
R&G Faserverbundwerkstoffe GmbH
manufacturer
Im Meiβel 7 - 13, D-71111 Waldenbuch
+49 (0)7157 5304-60
http://www.r-g.de
Emergency Contacts
Vertgiftungs-Informations-Zentrale Freiburg
+49 (0)761 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-hydro-.omega.-hydroxy-, ether with 2,2-bis(hydroxymethyl)-1,3-propanediol (4:1),2-hydroxy-3-mercaptopropyl ether EC: 701-196-7 | 72244-98-5 | 50 - 100% | Yes |
| 2,4,6-tris(dimethylaminomethyl)phenol EC: 202-013-9 | 90-72-2 | 10 - 25% | Yes |
Notes
Full text of H and EUH statements: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. When in doubt or if symptoms are observed, get medical advice.
After contact with skin, wash immediately with plenty of water and soap. If skin irritation occurs: Get medical advice/attention.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.
Immediately call a doctor.
Immediate Medical Attention
Immediately call a doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2). Extinguishing powder. Water spray. In case of major fire and large quantities: Water spray jet, alcohol resistant foam.
Full water jet
In case of fire may be liberated: Gases/vapours, toxic
Use water spray jet to protect personnel and to cool endangered containers. Suppress gases/vapours/mists with water spray jet.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing. Full protection suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Use personal protection equipment.
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Epoxy Minute Adhesive Hardener
UFI: S550-J05V-500V-HWXK
DEVCON® 5 Minute® Epoxy Resin
---
Easy-Mix HT 180 Epoxy Adhesive Hardener
---
Epoxy Minute Adhesive Resin
---
Easy-Mix RK-7100 Structural Acrylic Adhesive Hardener
UFI: D960-4051-500A-4CHE
EPOFIX HARDENER
CAS: 90640-67-8
Hardener
---
Strongcoat Epoxy Base
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Avoid contact with skin, eyes and clothes. Do not breathe gas/fumes/vapour/spray. Use personal protection equipment.
Keep container tightly closed and dry. Keep/Store only in original container. Protect against: frost.
Avoid contact with skin, eyes and clothes.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations.
Wear suitable gloves. Suitable material: NBR (Nitrile rubber), FKM (fluoro rubber). Thickness of the glove material >= 0,5 mm. Suitable material: PVC (Polyvinyl chloride). Wearing time with permanent contact: <= 15 min. Unsuitable material: Thick fabric, Leather articles. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Protect skin by using skin protective cream. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Tightly sealed safety glasses.
In case of inadequate ventilation wear respiratory protection. Combination filtering device (EN 14387) A-P2
Wear suitable protective clothing.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
No information available.
Reacts with : Oxidising agent
Protect against: frost.
Oxidising agent
In case of fire may be liberated: Gases/vapours, toxic, Carbon monoxide, Nitrogen oxides (NOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Dispose of waste according to applicable legislation.
Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3334
- Shipping Name
- AVIATION REGULATED LIQUID, N.O.S. (MERCAPTAN-TERMINATED POLYMER)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Employment restrictions: Observe restrictions to employment for juvenils according to the 'juvenile work protection guideline' (94/33/EC).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 5 Min. Epoxy Hardener?
The signal word is warning.
What is the physical form of 5 Min. Epoxy Hardener?
5 Min. Epoxy Hardener is a liquid with light yellow color. It has like: rotten eggs odor.
What is 5 Min. Epoxy Hardener used for?
Curing agent
What are the hazard statements for 5 Min. Epoxy Hardener?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of 5 Min. Epoxy Hardener?
The melting point is not determined and the boiling point is > 100 °C.